Enclosures and housings
Folding Glass Partition (corner)
- Bounding box
- 73.6 × 73.6 × 192 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
MS frame work for door support covered with Gypsum board and Sliding and folding partition with aluminium profile size width 35mm and height 110mm with painted MDf. Maximum height 3 mtr Maximum length of per panel 900mm
Parameters
| Name | Value | Range |
|---|---|---|
| Panel width | 900 mm | 400 – 900 |
| Panel height | 2400 mm | 1800 – 3000 |
| Profile width | 35 mm | 20 – 60 |
| Profile height | 110 mm | 60 – 160 |
| Glass thickness | 10 mm | 6 – 16 |
| Hinge post diameter | 40 mm | 25 – 80 |
| Handle knob diameter | 30 mm | 16 – 50 |
| Handle projection | 35 mm | 15 – 80 |
| Handle height above floor | 1050 mm | 300 – 2600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,