Enclosures and housings
Folded Eyewear Docking Configuration
- Bounding box
- 150.0 × 27.0 × 46.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Folded docking configuration (eye wear) In one principal embodiment, when temples (50) are folded across the rear of lenses (L) and the assembly is placed front-down on surface (S), three contact regions support the frame: brow bar (11) (optionally via keel (24)) at the front, and the two support loops (60) at the rear. Loop standoff (61), loop longitudinal position (63) relative to the fold point, and brow-bar geometry are mutually dimensioned such that: (a) the support triangle (T) has a rear base width of at least 50 mm (preferred ≥ 55 mm); (b) the folded center of mass (CM) lies within triangle (T) with a margin of at least 5 mm (preferred ≥ 8 mm) from every edge; and (c) the lowermost lens edges are suspended at a clearance (C) of at least 2 mm (preferred ≥ 3 mm) above surface (S). In this configuration the optical surfaces cannot contact the resting surface, protecting coatings and prescriptions without a case.
Parameters
| Name | Value | Range |
|---|---|---|
| Brow bar width | 130 mm | 100 – 160 |
| Brow bar depth (when folded) | 8 mm | 6 – 12 |
| Brow bar thickness | 3 mm | 2 – 5 |
| Keel length | 30 mm | 20 – 40 |
| Keel forward protrusion | 6 mm | 4 – 10 |
| Keel downward protrusion | 4 mm | 2 – 6 |
| Lens width | 55 mm | 40 – 70 |
| Lens height | 40 mm | 30 – 50 |
| Lens thickness | 2 mm | 1 – 4 |
| Lens centre distance | 65 mm | 55 – 75 |
| Lens bottom clearance above surface | 2 mm | 1 – 5 |
| Temple length | 140 mm | 120 – 160 |
| Temple width (height when horizontal) | 8 mm | 6 – 12 |
| Temple thickness | 3 mm | 2 – 5 |
| Temple gap behind lens | 2 mm | 1 – 5 |
| Support loop outer diameter | 12 mm | 10 – 16 |
| Support loop inner diameter | 8 mm | 6 – 10 |
| Support loop height | 2 mm | 1 – 4 |
| Loop offset from temple tip | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox