5201000820
Loading the interactive model…
Interactive 3D model of Foldable Desk

Enclosures and housings

Foldable Desk

1 views
Bounding box
1000 × 520 × 820 mm
Engine
3D Printing B-rep
Parameters
18
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

### Foldable desk – Design specifications Overall dimensions (assembled): * Height: 100 cm * Width: 100 cm * Depth: 50 cm 1\. Tabletop * Made of two solid wooden panels, each 50 × 50 cm. * Joined in the middle using a hinge. * Folds in half to allow the side panels to fold inward without overlapping. 2\. Side panels * Two solid wooden plates. * Same material and thickness as the tabletop. * Each attached to the tabletop using hinges. * Fold inward for compact storage. 3\. Backplate * Dimensions: 100 × 20 cm. * Installed horizontally underneath the tabletop, at the rear. * Connects the two side panels. * Attaches to the inner sides using quick-snap connectors. * Acts as a structural brace, preventing the side panels from folding inward while assembled. * Removable for folding and storage. 4\. Folding mechanism and sequence * Remove the backplate using the quick-snap connectors. * Fold the tabletop in half along its center hinge. * Fold both side panels inward. * Store the desk as a compact folded unit. 5\. Hardware * Center hinge for the tabletop. * Hinges connecting tabletop to side panels. * Quick-snap connectors for the removable backplate. * Suitable locking mechanisms to prevent accidental folding during use. Main design principle: The tabletop folds first to create clearance for the two solid side panels to fold inward without interfering with each other.

Parameters

NameValueRange
Overall width1000 mm600 – 1400
Overall depth500 mm300 – 800
Side panel height800 mm600 – 1000
Panel thickness20 mm12 – 30
Center hinge length500 mm200 – 800
Side hinge length200 mm100 – 400
Hinge barrel diameter12 mm6 – 20
Hinge leaf thickness3 mm1.5 – 6
Hinge leaf width25 mm12 – 50
Knuckle length40 mm20 – 80
Backplate height200 mm100 – 400
Backplate thickness20 mm10 – 30
Snap connector length30 mm15 – 60
Snap connector width20 mm10 – 40
Snap connector height15 mm8 – 30
Latch length40 mm20 – 80
Latch width25 mm12 – 50
Latch height10 mm5 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS