Enclosures and housings
Foil Packet Stacking Dispenser
- Bounding box
- 78 × 78 × 139 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable stacking dispenser box for 50.8 mm square foil packets. Units: mm. One watertight solid, prints upright, no supports. SPEC Outer 62x62x139, open top. Cavity 54x54, 135 deep, floor 4. Walls a constant 4, no thickened corners. Vertical corners: outer R8, cavity R4 (concentric). Skirt: 45-degree flare, 8 tall, 8 wider per side (78x78 base), no overhang. Front (-Y) thumb notch: 25.4 wide, centered, open from top rim down to 6 above cavity floor, full-round bottom, 1.5 edge fillets. Top rim: inner fillet 2.5, outer fillet 1.2, no sharp edges. CHECK before output, fix any failure: 1. Size 62x62x139, base 78x78 2. Cavity 54x54x135, floor 4 3. Wall constant 4; corners R8 outer, R4 inner 4. Notch 25.4 wide, front only, open top, round bottom 5. Rim fillets 2.5 inside, 1.2 outside 6. One solid, no extra features, no supports
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width | 62 mm | 30 – 150 |
| Outer depth | 62 mm | 30 – 150 |
| Outer height | 139 mm | 60 – 300 |
| Wall thickness | 4 mm | 1.2 – 10 |
| Floor thickness | 4 mm | 1.2 – 20 |
| Outer vertical corner radius | 8 mm | 2 – 20 |
| Base flare height | 8 mm | 1 – 30 |
| Base flare per side | 8 mm | 0 – 30 |
| Front notch width | 25.4 mm | 5 – 60 |
| Notch bottom above cavity floor | 6 mm | 1 – 40 |
| Notch edge fillet | 1.5 mm | 0.5 – 4 |
| Rim inner fillet | 2.5 mm | 0.5 – 5 |
| Rim outer fillet | 1.2 mm | 0.3 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,