Enclosures and housings
Fluted Soap Tub Sleeve
- Bounding box
- 85 × 85 × 90 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable cylindrical decorative sleeve for a commercial solid dishwashing soap tub. The sleeve must be hollow, open at the top, and have a flat stable bottom. Add evenly spaced vertical rounded flutes around the entire exterior, matching a minimalist modern kitchen aesthetic. The original soap tub must slide inside and be removable for replacement. Do not create a lid, pump, soap dispenser mechanism, or internal soap compartment. Use a smooth inner wall, uniform wall thickness of 2.5 mm, and a bottom thickness of 3 mm. Make the outer diameter, total height, and inner diameter editable parameters. Export as STL for FDM 3D printing. Do not invent final dimensions: ask for the soap tub measurements before finalizing the model.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner bore = tub diameter + 0.5 mm clearance | 75 mm | 40 – 130 |
| Outer diameter across the flute crests | 85 mm | 50 – 160 |
| Overall sleeve height = tub height + 10 mm | 90 mm | 40 – 180 |
| Side wall thickness | 2.5 mm | 1.5 – 6 |
| Solid bottom thickness | 3 mm | 1.5 – 10 |
| Number of evenly spaced vertical flutes | 24 mm | 6 – 72 |
| Inner top chamfer that guides the tub in | 1.5 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no