Brackets and mounts
Flat Rectangular Mounting Plate
- Bounding box
- 100.0 × 60.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat rectangular mounting plate 100 mm long, 60 mm wide, and 6 mm thick. Add four through-holes, each 8 mm in diameter, with hole centers 10 mm from each adjacent edge (a 2x2 pattern). Add 5 mm fillets to the four outside vertical corners. Keep it as one solid. Use millimeters and expose length, width, thickness, hole diameter, edge offset, and fillet radius as editable parameters. Export STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 100 mm | 20 – 300 |
| Width | 60 mm | 20 – 200 |
| Thickness | 6 mm | 1 – 30 |
| Hole Diameter | 8 mm | 1 – 20 |
| Edge Offset | 10 mm | 1 – 40 |
| Fillet Radius | 5 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o