Enclosures and housings
Flanged Splined Hub
- Bounding box
- 200.1 × 200.0 × 51.6 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid of revolution around the Z-axis in millimeters. Sketch a closed 2D profile on the XZ plane using radial X coordinates and axial Z coordinates: Start at (X=54.8, Z=0), go to (X=100, Z=0), then to (X=100, Z=10), then to (X=62.5, Z=10), then to (X=62.5, Z=51.5), then to (X=55, Z=51.5), then to (X=55, Z=37.5), then to (X=49.9, Z=37.5), then to (X=49.9, Z=10), then to (X=54.8, Z=10), and close the profile back to (X=54.8, Z=0). Revolve this profile 360 degrees around the Z-axis. Next, cut 3 equally spaced through-holes of diameter 14.2 mm on a bolt circle diameter of 172 mm through the flange (from Z=0 to Z=10), starting with the first hole at 90 degrees (top). Next, cut 6 equally spaced internal straight-sided splines inside the bore from Z=10 to Z=37.5. Each spline slot has a width of 7 mm, extending radially from the minor diameter of 99.8 mm (radius 49.9 mm) to a major root diameter of 109.5 mm (radius 54.75 mm). Finally, apply only these two fillets: 1. Radius 2 mm on the external corner where the hub meets the flange at (X=62.5, Z=10). 2. Radius 1.5 mm on the internal step corner at (X=55, Z=37.5).
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Outer Radius | 100 mm | 50 – 200 |
| Flange Bottom Inner Radius | 54.8 mm | 20 – 80 |
| Flange Thickness | 10 mm | 2 – 30 |
| Hub Outer Radius | 62.5 mm | 30 – 120 |
| Hub Top Z | 51.5 mm | 10 – 120 |
| Upper Bore Radius | 55 mm | 20 – 100 |
| Internal Step Z | 37.5 mm | 10 – 80 |
| Bore Radius | 49.9 mm | 10 – 90 |
| Bolt Hole Diameter | 14.2 mm | 2 – 30 |
| Bolt Circle Diameter | 172 mm | 100 – 300 |
| Bolt Hole Count | 3 count | 1 – 12 |
| Bolt Hole Start Angle | 90 deg | 0 – 360 |
| Spline Count | 6 count | 1 – 20 |
| Spline Slot Width | 7 mm | 1 – 20 |
| Spline Minor Radius | 49.9 mm | 10 – 90 |
| Spline Major Root Radius | 54.75 mm | 20 – 100 |
| Spline Start Z | 10 mm | 0 – 80 |
| Spline End Z | 37.5 mm | 5 – 100 |
| Spline Start Angle | 0 deg | 0 – 360 |
| Outer Fillet Radius | 2 mm | 0 – 5 |
| Inner Step Fillet Radius | 1.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
