Enclosures and housings
Fish Dish
- Bounding box
- 80 × 60 × 6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable shallow fish-shaped dish based on a simple fish silhouette. Exact dimensions: - Overall length: 80 mm. - Overall width: 60 mm. - Total height: 6 mm. - Bottom thickness: 3 mm. - Recessed inner basin depth: 3 mm. - Raised rim around the entire perimeter: 6 mm high. The fish silhouette must have a pointed tail on the left and a pointed head on the right, matching a traditional simple fish outline. The recessed basin must extend continuously from the central body all the way into the tail area, following the fish silhouette. Do not leave the tail flat or raised. Make the bottom smooth, the rim rounded slightly, and all transitions smooth. Create one single watertight solid suitable for FDM 3D printing. No holes, no separate parts. Use millimeters. Export as STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 80 mm | 40 – 200 |
| Overall width | 60 mm | 30 – 200 |
| Total height | 6 mm | 3 – 20 |
| Bottom thickness | 3 mm | 1 – 10 |
| Recessed basin depth | 3 mm | 1 – 10 |
| Rim wall width | 3.5 mm | 3 – 8 |
| Rim edge chamfer | 0.5 mm | 0.2 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,