Brackets and mounts
Fin-and-Tube AC Heat Exchanger
- Bounding box
- 810 × 26 × 500 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
I want to make a heat exchanger for an outdoor airconditioning unit. It looks like a grill, but in the grill there are running refrigerant tubes connected to the fin of the grill. Tube inner diameter is 4mm and wall thickness is 0,5mm. Fin is around 20mm long. Material is aluminium 3d printed. There need to be 40 tubes running from left to right and distance between the tubes bertical is around 10mm. On the left side there is a collector that connects the 40 tubes towards 1 point. Onxthe other side there is a header to also connect the 40 tubes. So total height is around 500mm and total length is around 700mm
Parameters
| Name | Value | Range |
|---|---|---|
| Core length / tube run | 700 mm | 300 – 1000 |
| Core height | 500 mm | 200 – 800 |
| Fin depth / airflow depth | 20 mm | 10 – 60 |
| Number of horizontal refrigerant tubes | 40 mm | 5 – 80 |
| Vertical tube pitch | 12 mm | 8 – 30 |
| Tube outer diameter | 5 mm | 3 – 12 |
| Tube wall thickness | 0.5 mm | 0.3 – 1.5 |
| Fin spacing along tube axis | 8 mm | 3 – 20 |
| Fin plate thickness | 1.6 mm | 0.8 – 4 |
| Manifold length along X | 32 mm | 20 – 80 |
| Manifold depth | 26 mm | 16 – 60 |
| Manifold wall thickness | 4 mm | 2 – 8 |
| Material above/below tube band | 12 mm | 5 – 40 |
| Tube insertion depth into manifold | 8 mm | 4 – 20 |
| Port stub outer diameter | 12 mm | 6 – 25 |
| Port bore diameter | 8 mm | 3 – 20 |
| Port stub length | 25 mm | 10 – 60 |
| Left port centre height | 60 mm | 10 – 490 |
| Right port centre height | 440 mm | 10 – 490 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl