Enclosures and housings
FedPlug Enclosure with Internal Divider
- Bounding box
- 180 × 110 × 75 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing FedPlug enclosure. Add one continuous internal divider wall running parallel to the 180 mm X-axis. Requirements: - Divider position: Y = 70 mm from the power-side outer wall. - Divider thickness: 2 mm. - Divider height: 69 mm above the internal floor. - Divider length: run along the full internal length. - Join the divider to the enclosure floor and end walls. - Create two separate longitudinal compartments. - Do not change the outer enclosure dimensions. - Keep the top open. - Maintain editable geometry. - This is an unpowered mechanical prototype only.
Parameters
| Name | Value | Range |
|---|---|---|
| External length | 180 mm | 20 – 400 |
| External width | 110 mm | 20 – 300 |
| External height | 75 mm | 20 – 200 |
| Wall thickness | 3 mm | 1.2 – 10 |
| Bottom thickness | 3 mm | 1.2 – 10 |
| External vertical corner radius | 8 mm | 0 – 30 |
| Divider centerline from power-side (-Y) outer wall | 70 mm | 5 – 105 |
| Divider thickness | 2 mm | 1.2 – 6 |
| Divider height above internal floor | 69 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,