Enclosures and housings
Fanttik Modular Storage Case
- Bounding box
- 880.0 × 66.0 × 76.2 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
I need a modular case for holding fanttik products. I will be putting it in the trunk of my car. Each module will be connected by a dove tail. Products need to have 2mm of clearance so they fit properly without being too tight. The depth of each module should not exceed more than 3 inches. module 1 has the fanttik x8 apex with slot for 18 inch air tube that is 10mm in diameter. The Fanttik X8 Apex portable tire inflator measures 200.5 × 63.5 × 63.5 mm. Module 2 will have the fanttik s2 pro max, the dimensions are 61.4 × 61.4 × 213.8 mm. module 3 will have the fanttik x10 tiny bike pump. The dimensions are 72 × 59 × 30 mm. Module 4 will have Slots for 18 inch usbc cord that is coiled up. And space for 20 hex bits. Standard 1/4 inch size bits. I would like finger cutouts for everything so it will be easy to remove. I would also like all modules to be similar size even if it seems like it’s wasting space.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 220 mm | 200 – 250 |
| Outer Width | 66 mm | 60 – 80 |
| Outer Height | 76.2 mm | 70 – 90 |
| Clearance (total added to each product dim) | 2 mm | 1 – 5 |
| X8 Apex Length | 200.5 mm | 190 – 210 |
| X8 Apex Width | 63.5 mm | 55 – 70 |
| X8 Apex Height | 63.5 mm | 55 – 70 |
| S2 Pro Max Length | 213.8 mm | 200 – 230 |
| S2 Pro Max Width | 61.4 mm | 55 – 70 |
| S2 Pro Max Height | 61.4 mm | 55 – 70 |
| X10 Tiny Bike Pump Length | 72 mm | 60 – 80 |
| X10 Tiny Bike Pump Width | 59 mm | 50 – 70 |
| X10 Tiny Bike Pump Height | 30 mm | 20 – 40 |
| Air Tube Slot Diameter | 10 mm | 8 – 15 |
| Tube Slot X Offset from Left Edge | 40 mm | 10 – 100 |
| USB‑C Cord Cavity Length | 200 mm | 150 – 215 |
| USB‑C Cord Cavity Width | 46 mm | 30 – 60 |
| USB‑C Cord Cavity Depth | 56.2 mm | 30 – 70 |
| Hex Bit Socket Diameter | 7.5 mm | 6.5 – 10 |
| Hex Bit Pocket Depth | 20 mm | 10 – 30 |
| Hex Bit Spacing X | 18 mm | 12 – 25 |
| Hex Bit Spacing Y | 30 mm | 20 – 40 |
| Hex Bit Rows | 2 | 1 – 4 |
| Hex Bit Columns | 10 | 5 – 15 |
| Finger Cutout Radius | 12 mm | 8 – 20 |
| Finger Cutout X Offset from Edges | 30 mm | 15 – 50 |
| Dovetail Top Width (wider) | 10 mm | 6 – 16 |
| Dovetail Bottom Width (narrower) | 6 mm | 4 – 12 |
| Dovetail Depth (protrusion) | 6 mm | 4 – 10 |
| Dovetail Z Margin from top/bottom | 8 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no