F150 Raptor T-Profile Console Mount v4 One-Flat-End

1 views

Bounding box: 214 × 38 × 44.0 mm
Engine: 3D Printing B-rep
Parameters: 19
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

Photo-informed revision: straight right end, front tapered 19.5 mm, 16.8 mm pocket and 211.14 mm measured opening, top perimeter rounded, three inline holes

Parameters

Name	Value	Range
Opening measured length mm	211.14 mm	210 – 213
Insert stem upper length mm	209.5 mm	207 – 211
Insert stem upper width mm	15.5 mm	14 – 16.5
Stem lower length mm	190 mm	185 – 200
Stem lower width mm	13 mm	12 – 14
Stem depth mm	32 mm	25 – 36
Tapered front inset mm	19.5 mm	10 – 22
Flat rear inset mm	0 mm	0 – 5
Stem corner radius mm	4 mm	2 – 5
Upper deck length mm	214 mm	210 – 220
Upper deck width mm	38 mm	34 – 42
Upper deck height mm	12 mm	10 – 15
Deck corner radius mm	2 mm	1 – 3
Top edge rounded radius mm	2 mm	1 – 3
Hole pitch mm	65 mm	60 – 70
Upper bore diameter mm	8 mm	7 – 9
Upper depth mm	10 mm	8 – 11
Pilot diameter mm	6.5 mm	5 – 7
Pilot bore bottom Z mm	-10 mm	-14 – -5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS