Enclosures and housings
F-150 Center Console Drop-In Insert
- Bounding box
- 165.7 × 70.7 × 46.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Design a precision-fit, solid drop-in 3D printing insert for the center console pocket of a 2025 Ford F-150. Specifications & Dimensions: - Overall outer block dimensions: Tapered base 160mm length x 65mm width, scaling up to 164mm x 69mm at the top rim, with a total height of 45mm, leaving 1.5mm perimeter clearance on all outer walls for adhesive-backed rubber padding/Velcro. - Internal cavities (3 total vertical slots open from the top): 1. Center slot (Phone): 85mm length x 15mm width x 40mm depth, with rounded internal corners (R3). 2. Left device slot: 75mm length x 25mm width x 40mm depth. 3. Right device slot: 75mm length x 25mm width x 40mm depth. - Cable management: Add a 12mm vertical wire pass-through hole centered at the bottom of each of the three slots, connecting through to the bottom base of the insert. - Geometry requirements: Solid, watertight B-Rep / solid geometry output with clean fillets (2mm) on all top-facing edges to prevent scratching. Export as a single manifold STL file in millimetres.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 160 mm | 100 – 250 |
| Base Width | 65 mm | 40 – 120 |
| Top Rim Length | 164 mm | 100 – 260 |
| Top Rim Width | 69 mm | 40 – 130 |
| Overall Height | 45 mm | 20 – 100 |
| Slot Depth | 40 mm | 10 – 80 |
| Phone Slot Length | 85 mm | 40 – 150 |
| Phone Slot Width | 15 mm | 8 – 40 |
| Device Slot Length | 75 mm | 30 – 140 |
| Device Slot Width | 25 mm | 10 – 50 |
| Partition / Wall Gap | 5 mm | 2 – 15 |
| Lower Edge Margin | 4 mm | 1 – 15 |
| Slot Corner Radius | 3 mm | 0.5 – 8 |
| Top Edge Fillet Radius | 2 mm | 0.5 – 5 |
| Cable Pass-Through Diameter | 12 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,