Enclosures and housings
EYpot Edition 3.0 Self-Watering Partitioned Pot
- Bounding box
- 100.0 × 100.0 × 109.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
A detailed technical cross-sectional diagram, in a clean educational style against a light background, titled 'EYpot Edition 3.0: Functional Partitioned Prototype (Solid Outer Shell)'. On the left, a numbered parts legend: '1. Solid Outer Reservoir (PLA)', '2. Inner Plant Basket with Partition', '3. Floating Donut Gauge', '4. Two-Color Indicator Sleeve (Visible at Top)'. The main cross-section shows a nested assembly: 1. **Outer Reservoir Shell:** A continuous, watertight grey PLA cylindrical shell, fully sealed with measurements 'Outer Diameter: 100 mm', 'Height: 103 mm'. 2. **Inner Plant Basket:** Divided by a rigid vertical partition wall into two separate chambers. * The left chamber is labeled 'DRY FLOAT CHAMBER (Left)' and is a dry, narrow chamber dedicated to the float system, containing parts 3 & 4 with a guide rod. * The right chamber is labeled 'SOIL & WICKS CHAMBER (Right)' and contains soil, roots, and a small plant (pothos). It has a porous base. 3. **Float Mechanism:** * The **Floating Donut Gauge** is a buoyant ring in the left chamber. * The **Two-Color Indicator Sleeve** is above the donut, moving vertically. The PURPLE part of the sleeve is clearly visible and popped out of the top left rim, labeled 'PURPLE (MAX)'. The lower beige part is labeled 'BEIGE (MIN)'. 4. **Wicking System:** * Two distinct capillary wicks thread from the water in the reservoir, through the mesh base, deep into the soil. Text callouts point to 'Two Capillary Wicking Cords' and a general pointer to 'WICK MATERIAL'. Red arrows show wick movement direction from the reservoir up to the soil. 5. **Water Levels:** Blue water is shown in the reservoir with full, half, and empty lines. All labels are present with clean measurement lines, arrows, and an educational scale bar.<ctrl46>
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir Outer Diameter | 100 mm | 50 – 250 |
| Reservoir Height | 103 mm | 40 – 250 |
| Shell Wall Thickness | 2 mm | 1 – 8 |
| Shell Base Thickness | 2 mm | 1 – 8 |
| Water Gap Below Basket | 6 mm | 1 – 30 |
| Support Ledge Height | 3 mm | 1 – 10 |
| Support Ledge Width | 8 mm | 2 – 20 |
| Plant Basket Outer Diameter | 95 mm | 40 – 240 |
| Plant Basket Height | 100 mm | 30 – 240 |
| Basket Wall Thickness | 2 mm | 1 – 8 |
| Partition Wall Thickness | 2 mm | 1 – 8 |
| Partition Wall Width | 93 mm | 10 – 240 |
| Porous Base Hole Diameter | 3 mm | 0.5 – 10 |
| Porous Base Hole Spacing | 8 mm | 3 – 30 |
| Guide Rod Diameter | 4 mm | 1 – 12 |
| Guide Rod Length | 90 mm | 20 – 220 |
| Float Donut Outer Diameter | 20 mm | 8 – 60 |
| Float Donut Inner Diameter | 6 mm | 1.5 – 40 |
| Float Donut Thickness | 6 mm | 1 – 25 |
| Float Height Above Base | 56 mm | 12 – 200 |
| Indicator Sleeve Outer Diameter | 8 mm | 3 – 30 |
| Indicator Sleeve Bore | 3.9 mm | 1 – 25 |
| Indicator Sleeve Length | 50 mm | 10 – 200 |
| Capillary Wick Diameter | 5 mm | 1 – 20 |
| Capillary Wick Length | 95 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no