Brackets and mounts
Exploded Tapered Illuminated Railway Station Bollard Assembly
- Bounding box
- 3604.0 × 400.0 × 1342.0 mm
- Engine
- Precision B-rep
- Parameters
- 51
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed, realistic 3D CAD model of a modern tapered illuminated railway station bollard with an integrated solar-assisted power system. Overall dimensions: - Total height: 1000 mm. - Bottom diameter: 220 mm. - Top diameter: 140 mm. - Circular mounting base plate diameter: 260 mm. - Base plate thickness: 12 mm. - The main body must gradually taper towards the top. Design and appearance: - Create a sleek, tapered cylindrical bollard with a premium modern appearance. - Use a dark charcoal-grey recycled aluminium external casing. - Include a horizontal translucent frosted polycarbonate LED lighting band around the upper-middle section. - The lighting band must provide 360-degree illumination. - Include a compact rectangular solar panel integrated into the top surface. - Keep the solar panel flush with the top cap to reduce the risk of vandalism. - Use a minimalistic design with no sharp external edges. Internal components: - Include an internal LED lighting system producing 600 lumens. - Include an internal rechargeable battery connected to the solar panel. - Include a charge controller and suitable power electronics. - Include an internal Time-of-Flight pedestrian counting sensor behind a discreet protected window. - Include suitable internal mounting brackets and cable routing. Base and mounting: - Include an internal structural steel support. - Include a circular steel base plate with four evenly spaced anchor bolt holes. - Show the bollard secured to a reinforced concrete foundation. - Make the tapered outer aluminium casing removable for maintenance and replacement. - Use concealed tamper-resistant mechanical fasteners. Manufacturing and sustainability: - Use recycled aluminium for at least 50% of the outer casing material. - Design the casing as a replaceable component. - Keep the solar panel, battery and electrical components accessible for maintenance. - Use realistic manufacturing features and appropriate wall thicknesses. CAD output: - Produce a complete 3D solid assembly. - Model the tapered casing, top cap, solar panel, lighting diffuser, internal LED system, sensor, battery compartment, steel support frame, base plate and foundation separately. - Provide a realistic rendered view, exploded assembly view and front, side and top orthographic views. - Use millimetres as the measurement units.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 300 mm | 220 – 600 |
| Foundation Length | 400 mm | 200 – 800 |
| Foundation Width | 400 mm | 200 – 800 |
| Foundation Depth | 300 mm | 150 – 600 |
| Foundation Anchor Hole Dia | 20 mm | 8 – 40 |
| Foundation Anchor Spacing | 200 mm | 120 – 300 |
| Base Plate Diameter | 260 mm | 180 – 400 |
| Base Plate Thickness | 12 mm | 6 – 30 |
| Base Bolt Hole Dia | 14 mm | 6 – 30 |
| Bolt Circle Dia | 200 mm | 120 – 320 |
| Cable Entry Dia | 20 mm | 5 – 50 |
| Support Frame Width | 90 mm | 50 – 150 |
| Support Height | 850 mm | 600 – 1200 |
| Support Wall Thickness | 5 mm | 2 – 10 |
| Mounting Tab Length | 30 mm | 10 – 60 |
| Mounting Tab Width | 20 mm | 10 – 40 |
| Mounting Tab Thickness | 4 mm | 1 – 10 |
| Casing Bottom Dia | 220 mm | 150 – 350 |
| Casing Top Dia | 140 mm | 90 – 200 |
| Casing Height | 1000 mm | 700 – 1500 |
| Casing Wall Thickness | 3 mm | 1 – 6 |
| Top Cap Dia | 140 mm | 90 – 220 |
| Top Cap Height | 30 mm | 15 – 60 |
| Cap Edge Radius | 5 mm | 1 – 10 |
| Solar Recess Length | 100 mm | 60 – 150 |
| Solar Recess Width | 70 mm | 40 – 100 |
| Solar Recess Depth | 5 mm | 1 – 10 |
| Solar Panel Length | 100 mm | 60 – 150 |
| Solar Panel Width | 70 mm | 40 – 100 |
| Solar Panel Thickness | 5 mm | 1 – 10 |
| Diffuser Outer Dia | 160 mm | 100 – 220 |
| Diffuser Height | 60 mm | 20 – 120 |
| Diffuser Wall Thickness | 3 mm | 1 – 6 |
| Diffuser Height Position | 750 mm | 400 – 950 |
| LED Module Dia | 120 mm | 80 – 180 |
| LED Module Thickness | 15 mm | 5 – 30 |
| Battery Compartment Length | 70 mm | 40 – 120 |
| Battery Compartment Width | 50 mm | 30 – 80 |
| Battery Compartment Height | 100 mm | 50 – 150 |
| Battery Bottom Position | 300 mm | 100 – 600 |
| Sensor Length | 25 mm | 10 – 40 |
| Sensor Width | 20 mm | 8 – 35 |
| Sensor Height | 10 mm | 4 – 20 |
| Sensor Bottom Position | 800 mm | 500 – 950 |
| Bracket Thickness | 4 mm | 1 – 8 |
| Bracket Width | 20 mm | 10 – 40 |
| Bracket Length | 60 mm | 20 – 100 |
| Fastener Dia | 5 mm | 2 – 8 |
| Fastener Length | 12 mm | 5 – 25 |
| Fastener Head Dia | 8 mm | 4 – 16 |
| Fastener Head Height | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o