Enclosures and housings
Exploded Hexagonal Enclosure Set (16 to 8 in)
- Bounding box
- 1959.8 × 413.4 × 238.6 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
I want to create five separate, open-top, open-bottom, hexagonal enclosures. These hexagons will have pin-style hinges with removable pins, so that when stored each panel can be separated and lay flat. if possible, I would like the hinges to be printed so they are inside the corners of each hexagon, so they are somewhat hidden from the outside. One panel on each hexagon must have a hinged door separate from the structural frame for access into the inside of the hexagon. all hexagons will be 9 inches tall. The flat side to flat side diameter for the first hexagon will be 16 inches and each hexagon after will have a diameter of 2 inches less than the one before resulting in hexagons that are respectively 16, 14, 12, 10, and 8 inches in diameter. I want the hexagons to be sturdy enough to hold 50 pounds of weight.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap between enclosures | 50 mm | 10 – 200 |
| 16 in flat-to-flat enclosure | 406.4 mm | 150 – 500 |
| 14 in flat-to-flat enclosure | 355.6 mm | 150 – 500 |
| 12 in flat-to-flat enclosure | 304.8 mm | 150 – 500 |
| 10 in flat-to-flat enclosure | 254 mm | 150 – 500 |
| 8 in flat-to-flat enclosure | 203.2 mm | 150 – 500 |
| Enclosure height | 228.6 mm | 100 – 500 |
| Wall thickness | 6 mm | 3 – 12 |
| Corner hinge barrel diameter | 10 mm | 6 – 20 |
| Removable hinge pin diameter | 4 mm | 2 – 10 |
| Door width / panel width | 0.45 | 0.2 – 0.8 |
| Door height / enclosure height | 0.6 | 0.2 – 0.8 |
| Door hinge knuckle diameter | 20 mm | 10 – 40 |
| Door edge clearance | 8 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no