Brackets and mounts
Exploded Hand Exoskeleton
- Bounding box
- 1346.6 × 40 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Act as an experienced mechanical engineer specializing in robotics, exoskeleton design, and AutoCAD. Design a complete engineering drawing of a human hand exoskeleton that supports wrist and finger movements. **1. Personal dimensions (mm):** - Palm width: 10 mm - Palm length: 12 mm - Thumb: 70 mm - Index finger: 90 mm - Middle finger: 100 mm - Ring finger: 95 mm - Little finger: 75 mm Use only the provided measurements. If additional dimensions are required, ask me before proceeding. Do not invent sizes. **2. Structural requirements:** Include wrist and palm supports, movable finger segments, anatomical joints, hinges, fastening straps, mechanical linkages, an actuator mounting point, and connecting elements. **3. Engineering drawing requirements:** Prepare a professional, dimensioned AutoCAD engineering drawing using millimeters and a 1:1 scale. Organize components on separate layers and include all necessary dimensions, sections, and assembly details. **4. Required views:** - General view - Top, bottom, front, and side views - Detailed joint and component drawings - Complete assembly drawing - 3D model, if possible **5. Final deliverables:** - Editable DWG file - DXF file - 3D model - Dimensioned individual parts - Assembly drawing - Bill of materials with material specifications Ensure anatomical accuracy, correct joint alignment, structural strength, comfort, natural movement, and proper actuator placement. The result must be a complete and mechanically logical engineering design, not merely a visual illustration. All components must be dimensioned and suitable for further development in AutoCAD.
Parameters
| Name | Value | Range |
|---|---|---|
| Palm width | 10 mm | 8 – 30 |
| Palm length | 12 mm | 10 – 40 |
| Thumb length | 70 mm | 40 – 120 |
| Index finger length | 90 mm | 50 – 160 |
| Middle finger length | 100 mm | 60 – 180 |
| Ring finger length | 95 mm | 50 – 170 |
| Little finger length | 75 mm | 40 – 140 |
| Exploded row spacing | 120 mm | 30 – 300 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Hinge pin diameter | 2.5 mm | 1.5 – 5 |
| Finger side rail height | 5 mm | 2 – 12 |
| Linkage rod diameter | 2 mm | 1 – 4 |
| Strap width | 4 mm | 3 – 10 |
| Strap thickness | 1.2 mm | 0.6 – 4 |
| Base rail width | 3 mm | 2 – 8 |
| Base rail height | 2 mm | 1.2 – 5 |
| Actuator bolt hole diameter | 2 mm | 1.6 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
