Enclosures and housings
Exploded 5-Part Magnetic Drift Pad Enclosure
- Bounding box
- 1175.0 × 250.0 × 100.5 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a Hot Wheels magnetic drift pad as EXACTLY 5 SEPARATE, NON-CONNECTED CAD PARTS: 1. LEFT BOX HALF — 150 × 250 × 100 mm, hollow/open inside, with walls and bottom only. One outer side is the joining face. 2. RIGHT BOX HALF — 150 × 250 × 100 mm, hollow/open inside, matching the left half. Together they form ONE open 300 × 250 × 100 mm enclosure. 3. TOP PLATE A — 150 × 250 mm flat removable plate. 4. TOP PLATE B — 150 × 250 mm flat removable plate. 5. ROTATING DISC — separate 200 mm diameter × 5 mm thick circular disc with a central motor hub. NO magnet pockets. IMPORTANT: * Do NOT create one complete closed cuboid. * Do NOT connect any of the 5 parts together. * The two box halves MUST be hollow and physically separate. * Their center faces must have a simple tongue-and-groove slide joint and alignment pins. * When assembled, the two halves create one completely open interior with NO center wall or divider. * The two top plates sit on top of the box and form one flat 300 × 250 mm surface. * Add screw bosses to the box for removable top screws. * Every part must be individually printable on a Bambu Lab A1.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded layout gap | 250 mm | 200 – 500 |
| Box half width (X) | 150 mm | 100 – 300 |
| Box half depth (Y) | 250 mm | 150 – 500 |
| Box half height (Z) | 100 mm | 50 – 200 |
| Wall thickness | 3 mm | 2 – 6 |
| Top plate thickness | 5 mm | 3 – 10 |
| Rotating disc diameter | 200 mm | 100 – 300 |
| Rotating disc thickness | 5 mm | 3 – 10 |
| Motor shaft bore diameter | 10 mm | 4 – 30 |
| Motor hub boss diameter | 30 mm | 16 – 60 |
| Motor hub boss height | 10 mm | 4 – 20 |
| Tongue/groove depth | 5 mm | 3 – 10 |
| Tongue/groove width | 2 mm | 1 – 3 |
| Alignment pin diameter | 4 mm | 2 – 8 |
| Alignment pin length | 8 mm | 4 – 16 |
| Alignment pin hole clearance | 0.4 mm | 0.1 – 1 |
| Alignment pin spacing | 120 mm | 50 – 200 |
| Screw boss diameter | 8 mm | 4 – 16 |
| Screw clearance/pilot hole diameter | 3.4 mm | 2 – 6 |
| Screw boss offset from edges | 14 mm | 6 – 30 |
| Screw pilot hole depth | 12 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no