Brackets and mounts
EV Battery Pack and Subframe Assembly
- Bounding box
- 1600.0 × 1000.0 × 240.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design Task: Generate a parametric 3D CAD assembly of a standard Electric Vehicle (EV) battery pack and its supporting subframe structure, optimized for a 3-DOF longitudinal-pitch vibration model.1. Global Assembly & Coordinate System:Origin $(0,0,0)$ located precisely at the Battery Pack Center of Gravity (CG).Longitudinal axis ($X$), Lateral axis ($Y$), Vertical axis ($Z$).2. Component 1: Battery Pack Enclosure (Rigid Body)Form Factor: Rectangular prismatic housing with rounded corners and a bolted top cover.Dimensions: Length = $1,200\text{ mm}$, Width = $1,000\text{ mm}$, Height = $150\text{ mm}$.Mass/Properties: Defined as structural aluminum with an aggregate mass of $120\text{ kg}$ and pitch moment of inertia $I_b = 18\text{ kg}\cdot\text{m}^2$.3. Component 2: Four Mounting Interfaces (Isolator Brackets)Front Mount Pair: Positioned symmetrically at $X = +550\text{ mm}$ from CG, spaced $800\text{ mm}$ laterally ($\pm 400\text{ mm}$ on $Y$).Rear Mount Pair: Positioned symmetrically at $X = -500\text{ mm}$ from CG, spaced $800\text{ mm}$ laterally ($\pm 400\text{ mm}$ on $Y$).Geometry: Integrated cast-aluminum or stamped steel mounting brackets with rubber-metal bushing pockets (inner sleeve diameter $12\text{ mm}$, outer housing diameter $40\text{ mm}$).4. Component 3: Supporting Vehicle Frame / Subframe RailsStructure: Two longitudinal box-section side rails (length $1,600\text{ mm}$, cross-section $60\text{ mm} \times 40\text{ mm}$, wall thickness $3\text{ mm}$) tied together by two structural cross-members.Integration: The four battery mounts bolt directly onto pads integrated into the frame cross-members, representing a flexible supporting structure with modal stiffness $k_f = 4.0 \times 10^5\text{ N/m}$.Output Requirements: Clean hierarchical assembly tree (Battery_Pack, Mount_FL, Mount_FR, Mount_RL, Mount_RR, Vehicle_Subframe), standard engineering tolerances, and exportable as a .step assembly file.
Parameters
| Name | Value | Range |
|---|---|---|
| Pack Length (X) | 1200 mm | 600 – 2500 |
| Pack Width (Y) | 1000 mm | 400 – 1600 |
| Pack Height (Z) | 150 mm | 60 – 400 |
| Corner Radius | 20 mm | 0 – 60 |
| Top Cover Height | 40 mm | 10 – 120 |
| Cover Flange Width | 40 mm | 10 – 150 |
| Cover Recess Depth | 6 mm | 0 – 25 |
| Cover Bolt Dia (M8) | 8 mm | 4 – 16 |
| Cover Bolt Pitch | 120 mm | 40 – 300 |
| Bracket Length (X) | 120 mm | 60 – 260 |
| Bracket Width (Y) | 80 mm | 40 – 200 |
| Bracket Height (Z) | 50 mm | 20 – 150 |
| Base Flange Thickness | 12 mm | 4 – 40 |
| Bushing Boss Length | 80 mm | 30 – 200 |
| Bushing Boss Width | 60 mm | 20 – 160 |
| Bushing Housing Dia | 40 mm | 15 – 90 |
| Bushing Sleeve Dia | 12 mm | 5 – 36 |
| Bushing Pocket Depth | 25 mm | 5 – 45 |
| Frame Bolt Dia (M10) | 11 mm | 5 – 20 |
| Bolt Spacing X | 48 mm | 15 – 100 |
| Bolt Spacing Y | 28 mm | 10 – 70 |
| Front Mount X | 550 mm | 100 – 1000 |
| Rear Mount X | -500 mm | -1000 – -100 |
| Mount Half-Track (Y) | 400 mm | 150 – 700 |
| Side Rail Length | 1600 mm | 800 – 3000 |
| Side Rail Width (Y) | 60 mm | 20 – 150 |
| Side Rail Height (Z) | 40 mm | 15 – 120 |
| Side Rail Wall | 3 mm | 1 – 10 |
| Rail Half-Spacing (Y) | 400 mm | 150 – 700 |
| Cross-Member Width (X) | 60 mm | 20 – 200 |
| Cross-Member Height (Z) | 40 mm | 15 – 120 |
| Cross-Member Wall | 3 mm | 1 – 10 |
| Mount Pad Length (X) | 140 mm | 60 – 300 |
| Mount Pad Width (Y) | 100 mm | 40 – 220 |
| Mount Pad Thickness | 8 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
