Enclosures and housings
ESP32-WROOM Enclosure with 1.9in LCD Window & Angled Stand
- Bounding box
- 74.6 × 40.8 × 33.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
and an angle to the bottom of the case so the whole case sits at an angle
Parameters
| Name | Value | Range |
|---|---|---|
| Board length | 65 mm | 20 – 120 |
| Board width | 32 mm | 10 – 80 |
| Clearance per side | 0.4 mm | 0.1 – 2 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Floor thickness | 2.5 mm | 1.2 – 6 |
| Internal depth | 12 mm | 5 – 40 |
| Outer corner radius | 2 mm | 0.5 – 8 |
| PCB standoff diameter | 7 mm | 3 – 12 |
| PCB standoff height | 3.5 mm | 1 – 15 |
| PCB screw pilot hole dia | 2.8 mm | 2 – 5 |
| USB cutout width | 12 mm | 6 – 25 |
| USB cutout height | 6 mm | 3 – 15 |
| USB cutout bottom height | 5 mm | 0 – 20 |
| Vent slot width | 2.5 mm | 1 – 8 |
| Vent slot height | 6 mm | 1 – 15 |
| Cover thickness | 2.5 mm | 1.2 – 6 |
| LCD window length | 40 mm | 10 – 60 |
| LCD window width | 26 mm | 10 – 35 |
| LCD seating recess depth | 1.2 mm | 0.2 – 2 |
| Mating lip height | 3 mm | 1 – 8 |
| Mating lip thickness | 1.5 mm | 1 – 4 |
| Lip clearance per side | 0.2 mm | 0.1 – 0.5 |
| Viewing tilt of the whole case | 12 deg | 0 – 45 |
| Stand thickness at the low end | 4 mm | 2 – 15 |
| Stand overhang past the case | 2 mm | 0.5 – 10 |
| Case locating pocket depth | 1.6 mm | 0 – 4 |
| Pocket clearance per side | 0.3 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
