3D preview of ESP32 Super Mini Snap-Fit Case - Left Half with Clip
Loading the interactive model…
Interactive 3D model of ESP32 Super Mini Snap-Fit Case - Left Half with Clip

Brackets and mounts

ESP32 Super Mini Snap-Fit Case - Left Half with Clip

1 views
Bounding box
18 × 45 × 55 mm
Engine
3D Printing B-rep
Parameters
20
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Single solid, 3D-printable, millimeters. "Part 1" (left half, X<=0) of a two-piece snap-fit case for an ESP32 Super Mini, with an integrated clothing clip. Keep coordinates exactly; do not rotate or re-center. Use named parameters. Closed case: rounded box X -12.5..12.5, Y -22.5..22.5, Z 0..55. Halves split at X=0. Z=0 is the bottom. 1. Hollow half box X -12.5..0, wall 1.6, open at X=0. Cavity X -10.9..0, Y ±20.9, Z 1.6..53.4, completely empty. Fillet R2 on outer edges except those on X=0. 2. Rabbet joint: for X -7.5..0, remove the inner 0.9 mm of the wall around the whole open perimeter, leaving a 0.7 mm outer skin. 3. Four rectangular windows through the skin only, on walls Y=-22.5 and Y=+22.5, centered at Z=17 and Z=38, 8.6 mm long in Z, X from -7.0 to -5.3. 4. USB-C slot: half of a stadium slot through the bottom wall (Z 0..1.6), centered X=0, Y=0. Full slot 9.5 (Y) x 3.8 (X), end radius 1.9. Part 1 has the X -1.9..0 half. Cut through the skin too. 5. Clip on the outer face X=-12.5: XZ profile extruded 20 mm along Y (Y -10..10). Let d = distance outward from the face. Root block d -1..4, Z 50..55. Plate d 2..4, Z 6..55 (2 mm thick, 2 mm gap to the wall; the gap ends in an R1 semicircle peaking at Z=51). Free end flares outward: inner face (d,Z) (2,6)->(3.5,0), outer face (4,6)->(5.5,0). Grip bump on the plate's inner face at Z=12: 0.8 mm tall, 3 mm base, 45 degree flanks.

Parameters

NameValueRange
Half width of the closed case12.5 mm6 – 25
Half depth of the closed case22.5 mm10 – 40
Case height55 mm20 – 100
Wall thickness1.6 mm1.2 – 3
Outer fillet radius2 mm1 – 5
Rabbet depth removed from inside0.9 mm0.4 – 1.2
Rabbet reach from the split plane7.5 mm2 – 15
Lower window centre height17 mm5 – 50
Upper window centre height38 mm5 – 50
Window length along Z8.6 mm2 – 20
Window start X-7 mm-10 – -1
Window end X-5.3 mm-10 – -1
Slot width along Y9.5 mm4 – 16
Slot width along X3.8 mm2 – 8
Clip width along Y20 mm8 – 40
Plate lower end6 mm2 – 30
Gap between plate and case wall2 mm0.5 – 6
Plate thickness2 mm1.2 – 5
Root block lower face50 mm20 – 54
Grip bump centre height12 mm3 – 45

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

ESP32 Super Mini Snap-Fit Case - Left Half with Clip - Free CAD Model (STEP, STL) | TextoCAD