Enclosures and housings
ESP32 + SCD40 Sensor Housing
- Bounding box
- 70.0 × 58.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
build a housing for a ESP32 Dev module with an SCD40 climate sensor. The sensor should be reaching outside the housing. The esp has an USB C port that should be reachable from the outside. Make sure there is good venting for the esp chip and the warm air doesn't move to the temperature sensor
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length (X) | 70 mm | 30 – 150 |
| Outer width (Y) | 50 mm | 20 – 120 |
| Outer height (Z) | 25 mm | 12 – 80 |
| Wall thickness | 2 mm | 1 – 8 |
| Partition X position | 20 mm | 5 – 100 |
| Partition thickness | 2 mm | 1 – 8 |
| USB-C cutout width | 11 mm | 5 – 30 |
| USB-C cutout height | 7 mm | 3 – 20 |
| Sensor port outer diameter | 12 mm | 5 – 40 |
| Sensor port protrusion | 8 mm | 2 – 50 |
| Sensor port bore | 8 mm | 2 – 30 |
| Sensor port X position | 10 mm | 2 – 80 |
| Sensor port Z position | 12.5 mm | 2 – 80 |
| Vent slot width (Y) | 3 mm | 1 – 15 |
| Vent slot length (X) | 20 mm | 3 – 80 |
| Number of vent slots | 3 mm | 1 – 12 |
| Vent slot spacing (Y) | 10 mm | 2 – 50 |
| Vent slots center X | 45 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no