70.4102.414.1
Loading the interactive model…
Interactive 3D model of ESP32-S3 4.0in Touch Back Housing

Brackets and mounts

ESP32-S3 4.0in Touch Back Housing

1 views
Bounding box
102.4 × 70.4 × 14.1 mm
Engine
3D Printing B-rep
Parameters
23
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Build a precise 3D-printable back housing for my Hosyond ESP32-S3 4.0-inch 320×480 touchscreen module. I will upload photos of the actual module. Use the photos and measurements as the physical reference. I need ONLY the BACK HOUSING. The complete ESP32-S3 touchscreen assembly must fit INSIDE the housing. Create a recessed internal pocket that matches the actual PCB/module shape. Requirements: - Phone-style rounded rectangle - Smooth rounded corners - Strong but printable walls - Internal pocket for the complete ESP32-S3 touchscreen assembly - 0.5–1 mm clearance around the electronics - Screen positioned correctly toward the front - PCB supported without bending or pressure - Mounting posts for securing the PCB - Space for wires and connectors - USB port opening aligned with the actual USB connector - Openings for buttons/connectors where necessary - Flat printable back - Avoid unnecessary supports and complicated geometry - Designed for an Entina Tina2C FDM 3D printer - Make the model dimensionally accurate and suitable for real assembly - Export as STL for 3D printing Do NOT make a decorative model. This must be a functional enclosure that physically fits the actual ESP32-S3 touchscreen hardware.

Parameters

NameValueRange
Overall module width, PCB or bezel96 mm50 – 150
Overall module height, PCB or bezel64 mm35 – 110
PCB thickness1.6 mm1 – 3
Screen stack in front of the PCB4.5 mm2 – 9
Tallest part behind the PCB5 mm2 – 14
Clearance per side0.8 mm0.3 – 1.5
Side wall thickness2.4 mm1.6 – 5
Back plate thickness2 mm1.2 – 5
Outer corner radius12 mm4 – 26
PCB support ledge width3.5 mm2 – 8
Screen recess below the front rim1 mm0 – 6
Screw boss diameter7 mm5 – 12
Screw hole inset from module edge4 mm2 – 20
Pilot hole dia for M3 self-tapping2.7 mm2 – 4.5
USB-C opening width10 mm6 – 20
USB-C opening height5.5 mm3 – 10
USB-C opening X offset0 mm-35 – 35
USB opening bottom above the back face2 mm0 – 10
Button access hole diameter3.4 mm2 – 8
Button 1 X-22 mm-45 – 45
Button 1 Y-25 mm-30 – 30
Button 2 X-12 mm-45 – 45
Button 2 Y-25 mm-30 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

ESP32-S3 4.0in Touch Back Housing - Free CAD Model (STEP, STL) | TextoCAD