Brackets and mounts
ESP32 + DS18B20 Press-Fit Enclosure (with internal mounts)
- Bounding box
- 99.0 × 49.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Keep the exact same 95x45x28mm press-fit enclosure and lid, and add internal mounting features on the bottom floor inside the box: 1) Two parallel cradle rails along the left side (length 55mm, spaced 25mm apart, height 6mm) to hold a 38-pin ESP32 board firmly, aligned with the front Micro-USB cutout. 2) Two cylindrical M3 screw standoffs on the right side (height 5mm, outer diameter 6mm, inner hole 2.5mm, spaced 16mm apart along the width) to mount a DS18B20 adapter module near the rear 5mm cable hole.
Parameters
| Name | Value | Range |
|---|---|---|
| Internal length | 95 mm | 30 – 250 |
| Internal width | 45 mm | 20 – 200 |
| Internal height | 28 mm | 10 – 120 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Outer corner radius | 3 mm | 0 – 8 |
| Micro-USB slot width | 12 mm | 6 – 25 |
| Micro-USB slot height | 8 mm | 3 – 15 |
| Micro-USB slot centre height | 10 mm | 5 – 40 |
| Rear cable hole diameter | 5 mm | 2 – 12 |
| Rear cable hole centre height | 12 mm | 4 – 40 |
| Lid press-fit clearance | 0.25 mm | 0.05 – 0.8 |
| Lid lip height | 3 mm | 1 – 8 |
| Lid lip wall thickness | 1.5 mm | 0.8 – 3 |
| ESP32 cradle rail length | 55 mm | 20 – 120 |
| Rail spacing (centre to centre) | 25 mm | 10 – 60 |
| Rail height | 6 mm | 2 – 15 |
| Rail width | 4 mm | 2 – 10 |
| M3 standoff height | 5 mm | 2 – 15 |
| M3 standoff outer diameter | 6 mm | 4 – 12 |
| M3 pilot hole diameter | 2.5 mm | 1.5 – 5 |
| Standoff spacing (along width) | 16 mm | 6 – 40 |
| Standoff inset from rear wall | 7 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
