Enclosures and housings
ESP32-CAM Pocket Camera Enclosure
- Bounding box
- 96.8 × 49.6 × 22.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Compact rounded two-piece printable enclosure for an ESP32-CAM with camera lens aperture, internal PCB standoffs, LiPo battery bay and guides, top shutter and power button holes, status LED opening, screw posts and removable lid. Dimensions are adjustable to the actual electronics.
Parameters
| Name | Value | Range |
|---|---|---|
| ESP32-CAM board length | 41 mm | 35 – 48 |
| ESP32-CAM board width | 27 mm | 22 – 34 |
| PCB thickness | 2 mm | 1 – 3 |
| LiPo battery length | 40 mm | 25 – 55 |
| LiPo battery width | 30 mm | 15 – 40 |
| LiPo battery thickness | 7 mm | 4 – 12 |
| Camera lens opening diameter | 9 mm | 5 – 14 |
| Push-button opening diameter | 7 mm | 4 – 10 |
| Enclosure wall thickness | 2.4 mm | 1.6 – 4 |
| Outer corner radius | 6 mm | 3 – 10 |
| Lid thickness | 2.4 mm | 1.6 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,