Enclosures and housings
EPE Foam Tray 520x290x75 with 5 Pockets
- Bounding box
- 520.0 × 290.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid EPE foam tray. Outer dimension: length 520mm, width 290mm, thickness 75mm. 5 rectangular pockets cut from top surface, cutting depth 55mm. Each pocket: X=80mm, Y=250mm. Position of pockets: Y direction: every pocket Y from 20mm to 270mm, left and right border 20mm. X direction: 1st pocket X:20~100 2nd pocket X:120~200 3rd pocket X:220~300 4th pocket X:320~400 5th pocket X:420~500 Spacing between pockets(rib width):20mm. Front and rear border: 20mm. Fillet R5 for every inner corner of pockets. Bottom plate thickness 20mm. All outer edges add small fillet R2. Generate solid body, export STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Tray Length (X) | 520 mm | 100 – 1200 |
| Tray Width (Y) | 290 mm | 100 – 800 |
| Tray Thickness (Z) | 75 mm | 20 – 200 |
| Pocket Length (X) | 80 mm | 10 – 300 |
| Pocket Width (Y) | 250 mm | 10 – 600 |
| Pocket Depth | 55 mm | 5 – 180 |
| Pocket Count | 5 pcs | 1 – 10 |
| Border / Pocket Start | 20 mm | 5 – 100 |
| Rib Width Between Pockets | 20 mm | 5 – 100 |
| Pocket Corner Fillet R | 5 mm | 0 – 20 |
| Outer Edge Fillet R | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no