Loading the interactive model…
Interactive 3D model of Enclosure with Lid and HingesEnclosures and housings
Enclosure with Lid and Hinges
21 views
- Bounding box
- 252.0 × 143.8 × 117.8 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
I would like the styrofoam on 4 sides and add a built-in lid with 3D-printed hinges and a lid
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 160 mm | 100 – 300 |
| Outer Width | 130 mm | 80 – 250 |
| Outer Height | 110 mm | 60 – 200 |
| Wall Thickness | 4 mm | 2 – 8 |
| Guide Slot Width | 10.6 mm | 5 – 20 |
| Guide Slot Depth | 2 mm | 0.5 – 5 |
| Guide Slot Y Position (Left/Right) | 0 mm | -50 – 50 |
| Guide Slot X Position (Front/Back) | 0 mm | -70 – 70 |
| Fan Center Y | 0 mm | -50 – 50 |
| Fan Center Z | 70 mm | 20 – 100 |
| Fan Window Size | 92 mm | 60 – 120 |
| Peltier Hole Size | 40 mm | 20 – 60 |
| Fan Recess Depth | 2 mm | 0.5 – 5 |
| Cable Channel Width | 5 mm | 2 – 10 |
| Cable Channel Height | 4 mm | 2 – 10 |
| Cable Channel Y Center | 0 mm | -50 – 50 |
| Cable Channel Clearance Below Fan | 5 mm | 1 – 20 |
| Front Hole Diameter | 3.4 mm | 2 – 6 |
| Front Hole Center X | 0 mm | -70 – 70 |
| Front Hole Center Z | 55 mm | 20 – 90 |
| Front Hole Spacing X | 40.5 mm | 10 – 80 |
| Front Hole Spacing Z | 32.5 mm | 10 – 60 |
| Lid Thickness | 4 mm | 2 – 8 |
| Lid Lip Height | 6 mm | 2 – 15 |
| Hinge Knuckle Width | 8 mm | 4 – 15 |
| Hinge Pin Diameter | 3 mm | 2 – 6 |
| Hinge Clearance | 0.4 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
STEPSTLGLB15 PARAMS
Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
STEPSTLGLB14 PARAMS