Enclosures and housings
EMT Ceiling Connector Hub, 4-Way
- Bounding box
- 92.0 × 92.0 × 92.2 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
"Generate a heavy-duty, solid mechanical 4-way ceiling connector hub for 1-inch EMT conduit. The hub must feature two horizontal socket sleeves set exactly 90 degrees apart from each other to form a flat ceiling square frame. Each socket sleeve must have an inner diameter of 30.0 mm with outer walls that are 7 mm thick. Additionally, the hub must feature two downward-facing wall socket sleeves branching downward. These downward sleeves must have the same 30.0 mm inner diameter and 7 mm wall thickness, and they must slope downward at a pitch angle of 55.4 degrees relative to the flat ceiling plane. Model a 6.6 mm cross-bolt hole completely through the side of all four socket sleeves for 1/4-inch hardware."
Parameters
| Name | Value | Range |
|---|---|---|
| Socket Inner Diameter | 30 mm | 20 – 40 |
| Socket Wall Thickness | 7 mm | 3 – 12 |
| Socket Sleeve Length | 70 mm | 60 – 120 |
| Downward Pitch Angle | 55.4 deg | 30 – 85 |
| Cross-Bolt Hole Diameter | 6.6 mm | 3 – 12 |
| Cross-Bolt Offset Along Sleeve | 30 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no