Enclosures and housings
EMG Sensor Plate and Kevlar Tunneling Box
- Bounding box
- 100.0 × 160.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Step 3: EMG Sensor Plate Assembly - On the top planar face (+Z face) of the palm base plate, sketch a rectangle centered at X = 0mm, Y = 70mm, measuring 75mm in width (X-axis) and 15mm in length (Y-axis). - Extrude this rectangle upward along the +Z axis by 5.0mm. - Cut 6 evenly spaced vertical cylindrical thru-holes of diameter 2.0mm straight through the Z-axis of this plate for EMG wire routing. Step 4: Kevlar Tunneling Box - On the top planar face (+Z face) of the palm base plate, sketch a rectangle centered at X = 0mm, Y = 35mm, measuring 55mm in width (X-axis) and 8mm in length (Y-axis). - Extrude this rectangle upward along the +Z axis by 8.0mm. - Cut 6 horizontal cylindrical thru-holes of diameter 2.0mm parallel to the Y-axis through the 8mm thickness of the box. - Cut an additional 6 horizontal cylindrical thru-holes of diameter 1.5mm parallel to the Y-axis through the box, positioned offset from the 2.0mm holes, for high-tenacity Kevlar line tunneling.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Width (X) | 100 mm | 50 – 200 |
| Base Plate Length (Y) | 160 mm | 100 – 300 |
| Base Plate Thickness (Z) | 5 mm | 1 – 20 |
| EMG Plate Center X | 0 mm | -20 – 20 |
| EMG Plate Center Y | 70 mm | 50 – 100 |
| EMG Plate Width (X) | 75 mm | 50 – 100 |
| EMG Plate Length (Y) | 15 mm | 5 – 30 |
| EMG Plate Extrusion (Z) | 5 mm | 1 – 15 |
| EMG Hole Diameter | 2 mm | 0.5 – 5 |
| EMG Hole Count | 6 | 2 – 12 |
| Kevlar Box Center X | 0 mm | -20 – 20 |
| Kevlar Box Center Y | 35 mm | 20 – 60 |
| Kevlar Box Width (X) | 55 mm | 40 – 80 |
| Kevlar Box Length (Y) | 8 mm | 4 – 20 |
| Kevlar Box Extrusion (Z) | 8 mm | 3 – 20 |
| Kevlar Hole Diameter (2.0 mm) | 2 mm | 0.5 – 5 |
| Kevlar Hole Diameter (1.5 mm) | 1.5 mm | 0.5 – 5 |
| Kevlar Hole Count per Set | 6 | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no