Brackets and mounts
EMcorp Hub Rear Enclosure - 3 Section Split
- Bounding box
- 377.0 × 254.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, 3D-printable rear enclosure for the EMcorp Hub, based on a Lenovo Yoga 500 laptop display. Exact outer dimensions: - Width: 377 mm - Height: 254 mm - Main body depth: 6 mm - Rounded corners and slightly rounded outer edges. - No Lenovo branding, no logos, no text. Rear construction: 1. Four reinforced mounting tabs, one near each corner, extending from the rear surface. 2. A reinforced central mounting area designed for a future rotating mechanism. 3. One circular cable pass-through hole, 20 mm in diameter, near the lower central area. 4. Smooth cable-hole edges. 5. Strong, solid connections between the tabs, reinforcement and main enclosure. 6. Keep the rear surface clean and minimalist. Rotating display preparation: The display must eventually rotate manually by 90 degrees between portrait and landscape orientation. The enclosure should have a reinforced central mounting area for a separate rotating mechanism. Do not create a motor or a complete rotating stand. 3D printing requirements: - Create a solid, manufacturable mechanical part. - Use millimeters as units. - Make the model suitable for FDM 3D printing. - The Creality K2 Combo has a build volume of 260 × 260 × 260 mm, so divide the enclosure into multiple accurately aligned printable sections. - Include alignment features and joining points between sections. - Avoid unsupported decorative details. Export: Provide a downloadable STL file for each individual printable section and, if possible, a complete STEP model. Prioritize dimensional accuracy and mechanical strength over visual decoration.
Parameters
| Name | Value | Range |
|---|---|---|
| Assembled Width | 377 mm | 300 – 500 |
| Assembled Height | 254 mm | 150 – 400 |
| Main Body Depth | 6 mm | 3 – 12 |
| Outer Corner Radius | 8 mm | 0 – 25 |
| Left Section Width | 118 mm | 60 – 180 |
| Center Section Width | 141 mm | 80 – 220 |
| Right Section Width | 118 mm | 60 – 180 |
| Corner Tab Size | 26 mm | 14 – 45 |
| Corner Tab Height | 8 mm | 3 – 20 |
| Corner Tab Screw Hole | 4.2 mm | 2 – 8 |
| Corner Tab Inset | 24 mm | 12 – 45 |
| Corner Tab Fillet | 6 mm | 0 – 10 |
| Alignment Tongue Length | 8 mm | 3 – 16 |
| Tongue Base Width | 30 mm | 12 – 60 |
| Tongue Tip Width | 22 mm | 8 – 50 |
| Tongue Fit Clearance | 0.25 mm | 0.05 – 1 |
| Tongue Y Offset | 70 mm | 10 – 115 |
| Joint Screw Tab Length | 24 mm | 10 – 45 |
| Joint Screw Tab Width | 14 mm | 6 – 30 |
| Joint Screw Tab Height | 3 mm | 1.5 – 10 |
| Joint Tab Fillet | 1.5 mm | 0 – 3 |
| Joint Screw Clearance Hole | 4.2 mm | 2 – 8 |
| Joint Pilot Hole | 2.8 mm | 1.5 – 6 |
| Joint Tab Y Offset | 95 mm | 30 – 118 |
| Rotating Pad Diameter | 110 mm | 50 – 140 |
| Rotating Pad Height | 3 mm | 1 – 10 |
| Pad Bolt Circle Dia | 85 mm | 30 – 120 |
| Pad Bolt Hole Dia | 4.5 mm | 2 – 8 |
| Pad Bolt Count | 6 count | 3 – 12 |
| Cable Hole Diameter | 20 mm | 8 – 45 |
| Cable Hole Y Position | -85 mm | -115 – -40 |
| Cable Hole Edge Fillet | 0.8 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
