Brackets and mounts
Electronics Enclosure with Sliding Lid
- Bounding box
- 60.0 × 40.0 × 29.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Prompt: "Design a precise 3D printable parametric electronics enclosure with the following features: Main Body / Box: Outer dimensions high enough to hold a human finger insertion cavity (height 26mm, outer width accommodating all internal parts). Finger Cavity: A vertical cylinder hole centered from the top, dimensions 15mm x 15mm base with a depth/height of 20mm for finger placement. Component Slots: Internal mounting space/slot for an ESP module. Dedicated internal cavity/slot for a Gyroscope sensor. Internal chamber/slot for a data logging system/chip. Sliding Track & Locking Lid: Top lid designed as a sliding mechanism with guide rails/grooves on the upper rim of the main box. Lid features a secure snap-locking system (tongue and groove) so it can easily slide open and lock closed. Fully removable top lid mechanism to expose all internal components when completely opened. Material Compatibility: Tolerances optimized for 3D printing with soft/flexible materials (like TPU or flexible PLA) to ensure smooth sliding and tight closing without snapping. Export: Watertight manifold 3D printable mesh ready for STL export."
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 60 mm | 40 – 120 |
| Box Width | 40 mm | 30 – 100 |
| Box Height | 26 mm | 20 – 60 |
| Finger Cavity Side | 15 mm | 8 – 30 |
| Finger Cavity Depth | 20 mm | 8 – 50 |
| ESP Slot Length | 16 mm | 8 – 40 |
| ESP Slot Width | 10 mm | 5 – 25 |
| ESP Slot Depth | 2 mm | 0.5 – 5 |
| Gyro Slot Side | 6 mm | 3 – 20 |
| Gyro Slot Depth | 1.5 mm | 0.5 – 5 |
| Data Slot Length | 20 mm | 8 – 50 |
| Data Slot Width | 8 mm | 4 – 25 |
| Data Slot Depth | 2 mm | 0.5 – 5 |
| Slot Margin | 3 mm | 1 – 10 |
| Guide Groove Length | 55 mm | 30 – 120 |
| Guide Groove Width | 4 mm | 2 – 10 |
| Guide Groove Depth | 2 mm | 0.5 – 5 |
| Rail Edge Offset | 5 mm | 2 – 15 |
| Lock Tab Diameter | 3 mm | 1 – 8 |
| Lock Tab Depth | 1.2 mm | 0.3 – 4 |
| Snap Tab X Offset | 5 mm | 3 – 30 |
| Lid Thickness | 3 mm | 1 – 8 |
| Lid Rail Width | 3.8 mm | 1.5 – 10 |
| Lid Rail Depth | 1.8 mm | 0.3 – 5 |
| Lock Tab Clearance | 0.2 mm | 0.05 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o