Brackets and mounts
Electronics Enclosure with Bicycle Tube Clamp Mount
- Bounding box
- 60 × 90 × 90 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
3D CAD enclosure box body for electronics, vertical rectangular matte black plastic housing, open front face with four corner screw bosses and four internal cylindrical standoffs on the back wall, single circular cable hole at the bottom. Attached to the exterior back wall is a bicycle tube clamp mount with an articulated pivot hinge and cylindrical ring clamp. Clean industrial CAD model, watertight solid mesh, isolated on a plain white background, studio render, no background, no wires.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing width | 60 mm | 30 – 150 |
| Housing height | 90 mm | 40 – 200 |
| Housing depth | 30 mm | 15 – 100 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Outer vertical corner radius | 3 mm | 0 – 8 |
| Corner screw boss diameter | 8 mm | 5 – 14 |
| Screw hole diameter | 3.4 mm | 2 – 6 |
| Screw hole depth | 9 mm | 4 – 20 |
| PCB standoff diameter | 7 mm | 4 – 12 |
| PCB standoff height | 5 mm | 2 – 12 |
| PCB standoff spacing X | 36 mm | 10 – 120 |
| PCB standoff spacing Z | 44 mm | 10 – 150 |
| Cable hole diameter | 12 mm | 4 – 30 |
| Mount centre height | 45 mm | 10 – 200 |
| Mount plate width | 36 mm | 20 – 80 |
| Mount plate height | 24 mm | 12 – 60 |
| Mount plate thickness | 5 mm | 2 – 12 |
| Fork arm gap | 8 mm | 3 – 20 |
| Fork arm thickness | 4 mm | 2 – 8 |
| Fork arm height | 16 mm | 8 – 40 |
| Fork arm length | 14 mm | 8 – 40 |
| Pivot pin diameter | 8 mm | 3 – 14 |
| Clamp ring outer diameter | 40 mm | 20 – 80 |
| Clamp ring inner diameter | 32 mm | 14 – 70 |
| Clamp ring width | 14 mm | 6 – 30 |
| Ring centre behind back wall | 40 mm | 25 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
