Enclosures and housings
Electronics Enclosure Base Tray
- Bounding box
- 100.0 × 80.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a colorful isometric exploded-view technical illustration of an electronics enclosure, following this exact layered composition from top to bottom, diagonally arranged (top-left to bottom-right): Top layer — Lid: A flat rounded-rectangle cover in light gray brushed aluminum finish, small screw holes at each corner, floating highest in the exploded sequence. Second layer — PCB assembly: A dark green PCB substrate (classic circuit-board green), positioned below the lid with visible gold/copper trace lines. On top of this PCB, place three distinct colored chip modules side by side: A blue rectangular chip block on the left labeled conceptually as the primary compute module A purple smaller chip block in the center representing the voter/comparator A teal/cyan rectangular chip block on the right, mirroring the blue one in size, representing the redundant compute module Leave a visible gap between the blue and teal blocks to show physical separation. Third layer — Power strip: A thin horizontal amber/orange-accented board strip below the PCB, representing the power regulation section, with small connector pins visible. Bottom layer — Enclosure base: A light gray matte plastic/metal base tray with four small screw standoffs at the corners and thin ventilation slots on one side wall. Style requirements: Isometric 3D render, exploded parts connected by thin dashed vertical alignment lines Studio product photography lighting, soft shadows beneath each floating layer Dark navy or black background for strong contrast (so the colors pop) Clean, modern tech/engineering aesthetic — like a premium product teardown render (similar to Apple/Dyson exploded-view marketing images) No text labels needed in the image itself High detail on screw threads, chip pin details, and PCB trace lines Overall color palette: blue, teal, purple, and amber accents against gray/silver hardware and a dark background"
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 100 mm | 60 – 200 |
| Base Width | 80 mm | 50 – 150 |
| Base Height | 20 mm | 10 – 40 |
| Wall Thickness | 2 mm | 1 – 5 |
| Corner Radius | 5 mm | 0.5 – 10 |
| Standoff Diameter | 6 mm | 3 – 10 |
| Standoff Height | 8 mm | 3 – 15 |
| Standoff Bore Diameter | 3 mm | 1.5 – 5 |
| Standoff Offset from Wall | 10 mm | 5 – 25 |
| Ventilation Slot Count | 4 | 1 – 10 |
| Slot Length | 30 mm | 10 – 60 |
| Slot Height | 2 mm | 1 – 5 |
| Slot Side Margin | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no