Enclosures and housings
Electronics Enclosure
- Bounding box
- 110 × 80 × 45 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular enclosure for an electronics project. Outer dimensions: 110 mm wide × 80 mm deep × 45 mm tall. Wall thickness: 2 mm. Split into a bottom tray and a top lid that press-fits together with a 1 mm lip. Top face of the lid: Three 5 mm circular holes in a straight row, centered left-to-right, spaced 12 mm apart, 15 mm from the front edge. These are for LEDs. One 8 mm circular hole, 20 mm to the right of the LED row, same depth from front edge. This is for a buzzer. One 12 mm circular hole centered on the right side wall, 15 mm from the bottom of the lid. This is for a push button. Front face of the bottom tray: One 10 mm × 6 mm rectangular slot centered horizontally, 10 mm from the bottom edge. This is for a USB cable. Right side of the bottom tray: Three 8 mm circular holes spaced 20 mm apart, 15 mm from the bottom, for sensor snouts (MQ modules). The sensor holes should face outward so gas can reach them. Interior: Four M3 standoff pillars 5 mm tall in each corner, 4 mm from each wall, with a 3 mm hole through the center for screws.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 110 mm | 80 – 200 |
| Depth | 80 mm | 60 – 200 |
| Bottom tray height | 30 mm | 15 – 80 |
| Lid height | 15 mm | 10 – 60 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Floor thickness | 2 mm | 1.2 – 6 |
| USB slot width | 10 mm | 4 – 30 |
| USB slot height | 6 mm | 2 – 20 |
| USB slot height from bottom | 10 mm | 2 – 25 |
| Sensor hole diameter | 8 mm | 2 – 20 |
| Sensor hole spacing | 20 mm | 10 – 60 |
| Sensor holes from bottom | 15 mm | 2 – 25 |
| Standoff height | 5 mm | 3 – 20 |
| Standoff diameter | 6 mm | 3 – 20 |
| Standoff through hole | 3.4 mm | 3 – 6 |
| Standoff inset from walls | 4 mm | 1 – 10 |
| LED hole diameter | 5 mm | 2 – 15 |
| LED hole spacing | 12 mm | 6 – 40 |
| LED row front inset | 15 mm | 2 – 40 |
| Buzzer hole diameter | 8 mm | 2 – 20 |
| Buzzer offset from LED row center | 20 mm | 0 – 50 |
| Push-button hole diameter | 12 mm | 4 – 30 |
| Push-button height from lid bottom | 7.5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
