Enclosures and housings
Electrolytic Cell Assembly
- Bounding box
- 127.5 × 127.5 × 183.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- August 23, 2026
Download
Free to download and use. See the terms.
The prompt
Design an electrolytic cell assembly: a 110x110x120mm acrylic tank with 5mm walls and open top, internal cavity 100x100x115mm, two 6mm gas outlet ports on one side wall at 30mm height. A flat 5mm thick lid seals the top, with a centered 36mm recessed boss on its underside for a submerged 35mm transducer facing down, plus two sealed cable feedthrough holes for electrode leads. Inside, two 45x45x1.2mm stainless steel plates stand vertically, parallel, centered under the transducer, with a 4mm gap between them.
Parameters
| Name | Value | Range |
|---|---|---|
| Tank outer length | 110 mm | 60 – 200 |
| Tank outer width | 110 mm | 60 – 200 |
| Tank outer height | 120 mm | 60 – 300 |
| Wall thickness | 5 mm | 2 – 15 |
| Internal cavity length | 100 mm | 30 – 190 |
| Internal cavity width | 100 mm | 30 – 190 |
| Internal cavity depth | 115 mm | 30 – 200 |
| Gas port diameter | 6 mm | 2 – 20 |
| Gas port height (from bottom) | 30 mm | 0 – 120 |
| Gas port spacing | 40 mm | 10 – 100 |
| Lid length | 110 mm | 60 – 200 |
| Lid width | 110 mm | 60 – 200 |
| Lid thickness | 5 mm | 2 – 20 |
| Recess diameter | 36 mm | 20 – 100 |
| Recess depth | 3 mm | 1 – 20 |
| Cable feedthrough diameter | 5 mm | 1 – 15 |
| Cable feedthrough spacing | 40 mm | 10 – 100 |
| Transducer diameter | 35 mm | 10 – 100 |
| Transducer height | 20 mm | 5 – 100 |
| Electrode plate side (width/height) | 45 mm | 10 – 100 |
| Electrode plate thickness | 1.2 mm | 0.5 – 10 |
| Gap between plates | 4 mm | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox