Enclosures and housings
Editable chassis spaceframe (coped round + square tube, Precision)
- Bounding box
- 725.1 × 603.0 × 950.9 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Refine this existing chassis in Precision mode, not Robotics. Keep the 700 mm length, front hoop 600 x 950 mm, rear bulkhead 500 x 450 mm, open top, and 350 x 350 x 300 mm battery box. Use hollow round tubes 25 mm OD x 2 mm wall and square floor tubes 25 x 25 x 2 mm. Keep exactly four attached suspension nodes per side and the rear X brace. Keep the battery separate from the frame; clear the hoop and tray, with support only at its four bottom corners. Cope or miter tubes at welded joints so members stay connected without deep overlaps. Fix unintended clashes only. Export STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Front hoop to rear bulkhead X distance | 700 mm | 400 – 1200 |
| Front hoop outside width | 600 mm | 300 – 1200 |
| Front hoop height | 950 mm | 300 – 1800 |
| Rear bulkhead outside width | 500 mm | 250 – 1000 |
| Rear bulkhead height | 450 mm | 200 – 1200 |
| Round tube OD / square tube side | 25 mm | 16 – 50 |
| Tube wall thickness | 2 mm | 1 – 5 |
| Battery reference box length (X) | 350 mm | 200 – 600 |
| Battery reference box width (Y) | 350 mm | 200 – 600 |
| Battery reference box height | 300 mm | 150 – 500 |
| Battery box wall thickness | 3 mm | 1.5 – 8 |
| Battery box bottom Z (corner support height) | 250 mm | 150 – 500 |
| Corner post length under battery | 45 mm | 20 – 150 |
| ASSUMPTION suspension hardpoint X (mirrored rear) | 175 mm | 50 – 300 |
| ASSUMPTION suspension hardpoint mid Z | 250 mm | 50 – 500 |
| Suspension node boss diameter | 20 mm | 10 – 40 |
| Suspension node Z offset from mid | 70 mm | 20 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
