Enclosures and housings
Editable chassis spaceframe
- Bounding box
- 725 × 628.0 × 975 mm
- Engine
- Robotics B-rep
- Parameters
- 12
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D vehicle chassis spaceframe, not a robot or a picture. Use millimetres. Front hoop at X=0: 600 wide and 950 high. Rear bulkhead at X=700: 500 wide and 450 high. Taper the frame evenly between them. Use hollow round steel tubes 25 mm diameter with 2 mm wall, and square steel tubes 25 x 25 mm with 2 mm wall. Material AISI 1020. Add a separate 350 x 350 x 300 mm battery reference box supported at its four bottom corners. Keep the top open for battery removal. Triangulate both sides and add an X brace at the rear. Show exactly four suspension nodes on each side. Their coordinates are not specified in the assignment, so use editable assumptions at X=175 and 525, and label them as assumptions. Do not add tubes outside the hoop or rear bulkhead. Export an editable STEP model.
Parameters
| Name | Value | Range |
|---|---|---|
| Front hoop to rear bulkhead X distance | 700 mm | 400 – 1200 |
| Front hoop outside width | 600 mm | 300 – 1200 |
| Front hoop height | 950 mm | 300 – 1800 |
| Rear bulkhead outside width | 500 mm | 250 – 1000 |
| Rear bulkhead height | 450 mm | 200 – 1200 |
| Round tube OD and square tube side | 25 mm | 16 – 50 |
| Tube wall thickness | 2 mm | 1 – 5 |
| Battery reference box length | 350 mm | 200 – 600 |
| Battery reference box width | 350 mm | 200 – 600 |
| Battery reference box height | 300 mm | 150 – 500 |
| ASSUMPTION front suspension hardpoint X | 175 mm | 50 – 300 |
| ASSUMPTION suspension hardpoint mid Z | 250 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
