Brackets and mounts
ecoDRYER Industrial Water-to-Air Finned Coil | DN500 Air DN80 Water
- Bounding box
- 1370.0 × 1422.4 × 1252.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of the ecoDRYER stainless water-to-air coil heat exchanger. Housing 1200 mm wide X, 550 mm deep Y, 1000 mm high Z. Front/rear DN500 air via 400 mm hollow rectangular-to-round transitions with bolted flanges, design airflow 7500 m³/h. Right side DN80 hot water entry at z800 and cold return z200, 150 mm outward spigots plus bolted flanges. Twenty hollow stainless water tubes in five 4-pass circuits with tube headers and true U-shaped return bends; thin aluminium perforated fins in crossflow, four support feet, removable service hatch, air vent, drain and two temperature sensor ports. Geometry conceptual; duty and pressure drops not validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing width along tubes | 1200 mm | 1100 – 1350 |
| Housing air passage depth | 550 mm | 500 – 650 |
| Housing height from base | 1000 mm | 950 – 1100 |
| Stainless steel shell sheet thickness | 4 mm | 3 – 6 |
| Front/rear process air bore DN500 | 500 mm | 480 – 530 |
| Each air transition length | 400 mm | 370 – 470 |
| Housing rectangular air throat width | 940 mm | 870 – 990 |
| Housing rectangular air throat height | 820 mm | 750 – 880 |
| Hot and return water bore DN80 | 80 mm | 75 – 90 |
| DN80 external pipe projection | 150 mm | 130 – 200 |
| Hot inlet above housing base | 800 mm | 760 – 840 |
| Water return above housing base | 200 mm | 170 – 240 |
| Stainless water tube OD (concept) | 32 mm | 26 – 38 |
| Stainless tube wall gauge | 2 mm | 1.5 – 3 |
| Parallel water circuit lanes | 5 | 4 – 5 |
| Tube pitch transverse to X | 80 mm | 75 – 85 |
| Aluminium fin plates shown (illustrative) | 20 | 12 – 28 |
| Aluminium fin thickness | 1.2 mm | 0.8 – 2 |
| Water distribution header OD | 100 mm | 92 – 112 |
| Support feet height | 180 mm | 140 – 230 |
| Inspection hatch clear width | 320 mm | 280 – 380 |
| Inspection hatch clear depth | 180 mm | 150 – 220 |
| Temperature sensor port bore | 22 mm | 18 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o