Brackets and mounts
EcoDRYER ID Fan 7500 CMH DN300 Suction + Vertical DN300-to-DN500 Diffuser
- Bounding box
- 1380.0 × 1522.0 × 2175.1 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Concept GA of induced-draught centrifugal fan designed to be selected for 7500 m3/h system airflow; horizontal DN300 inlet, upward DN300 circular discharge and 700mm-high concentric expansion to DN500 with 180mm straight DN500 outlet, flanges, separate rotor/impeller, steel casing, motor, coupling, guards and mounting skid. Flow and motor duty require fan curve and static-pressure data; geometry alone does not validate capacity.
Parameters
| Name | Value | Range |
|---|---|---|
| Suction clear bore DN300 | 300 mm | 280 – 350 |
| Fan vertical outlet bore DN300 | 300 mm | 280 – 350 |
| Top duct clear bore DN500 | 500 mm | 450 – 600 |
| Centrifugal impeller OD (concept) | 580 mm | 530 – 660 |
| Volute casing radial oversize | 145 mm | 130 – 175 |
| Fan scroll casing axial width | 440 mm | 390 – 480 |
| Fan centreline above floor | 650 mm | 610 – 730 |
| Steel shell / duct wall thickness | 6 mm | 4 – 10 |
| Vertical DN300 straight outlet | 300 mm | 260 – 400 |
| DN300 to DN500 cone length | 700 mm | 550 – 900 |
| Upper DN500 straight spigot | 180 mm | 120 – 300 |
| Horizontal suction spigot length | 220 mm | 160 – 320 |
| Motor enclosure OD (illustrative) | 240 mm | 210 – 300 |
| Motor enclosure length (illustrative) | 380 mm | 320 – 480 |
| Skid overall length X | 1380 mm | 1280 – 1500 |
| Skid overall width Y | 1430 mm | 1360 – 1580 |
| Base frame height | 130 mm | 110 – 150 |
| Backward-curved impeller blade count | 10 | 8 – 12 |
| DN300/DN500 flange bolt-hole dia | 22 mm | 20 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o