Enclosures and housings
ecoDRYER Centrifugal ID Fan — 7500 CMH | DN300 to DN500 Top Diffuser
- Bounding box
- 1380.0 × 1522.0 × 2085.1 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Parametric concept of centrifugal induced-draught fan for TARGET 7500 m3/h. Axial DN300 suction, upward DN300 outlet, separate 700mm DN300-to-DN500 concentric diffuser plus DN500 top straight duct, indicative PN10 flange bolt circles, shaft, impeller, motor, base. Requires manufacturer fan-curve/static-pressure validation.
Parameters
| Name | Value | Range |
|---|---|---|
| Suction clear bore DN300 | 300 mm | 280 – 350 |
| Fan vertical outlet bore DN300 | 300 mm | 280 – 350 |
| Top duct clear bore DN500 | 500 mm | 450 – 600 |
| Centrifugal impeller OD (concept) | 580 mm | 530 – 660 |
| Volute casing radial oversize | 145 mm | 130 – 175 |
| Fan scroll casing axial width | 440 mm | 390 – 480 |
| Fan centreline above floor | 650 mm | 610 – 730 |
| Steel shell / duct wall thickness | 6 mm | 4 – 10 |
| Vertical DN300 straight outlet | 300 mm | 260 – 400 |
| DN300 to DN500 cone length | 700 mm | 550 – 900 |
| Upper DN500 straight spigot | 180 mm | 120 – 300 |
| Horizontal suction spigot length | 220 mm | 160 – 320 |
| Motor enclosure OD (illustrative) | 240 mm | 210 – 300 |
| Motor enclosure length (illustrative) | 380 mm | 320 – 480 |
| Skid overall length X | 1380 mm | 1280 – 1500 |
| Skid overall width Y | 1430 mm | 1360 – 1580 |
| Base frame height | 130 mm | 110 – 150 |
| Backward-curved impeller blade count | 10 | 8 – 12 |
| DN300/DN500 flange bolt-hole dia | 22 mm | 20 – 24 |
| DN500 PN10 flange hole diameter (indicative) | 26 mm | 24 – 28 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,