Brackets and mounts
Eco Ssukssak Umbrella Wiper
- Bounding box
- 181.9 × 100 × 81 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
## ART 1. 3D Modeling Plan - **Product Name:** Eco Ssukssak - **Main Function:** A device mounted on the bus entrance handrail. When you insert a wet folded umbrella through the central hole and pull it upward, the built-in ring-shaped silicone wiper physically scrapes rainwater off the umbrella surface. The water is collected in the lower water tray and drained through the drain hole at the bottom. It operates without electricity — purely mechanical and eco-friendly. --- ## PART 2. Modeling Process Record ### ✅ 1. Create the Main Ring Frame 1. Drag a **Cylinder** onto the workplane. - Size: **Width 100 × Depth 100 × Height 30 mm** 2. Drag another **Cylinder** and place it exactly at the center of the first one. - Size: **Width 60 × Depth 60 × Height 40 mm** - Click the **Hole** button on the toolbar to turn it into a cut-out shape. 3. Select both shapes and click **Group** → A ring frame with a hollow center is formed. ### ✅ 2. Create the Water Collection Tray 1. Drag a **Box**. - Size: **Width 120 × Depth 100 × Height 40 mm** 2. Drag another **Box** and place it inside the first one, slightly upward from the bottom. - Size: **Width 110 × Depth 90 × Height 35 mm** - Set this one to **Hole**. 3. Select both boxes and click **Group** → A shallow tray shape is formed. 4. Drag a small **Cylinder** for the drain hole. - Size: **Width 10 × Depth 10 × Height 45 mm** - Set to **Hole**. 5. Place the drain cylinder at the **bottom center** of the tray, then group everything together. 6. Move the completed tray directly beneath the ring frame and use the **Align** tool to center it perfectly. ### ✅ 3. Create the Mounting Clips (Left & Right) 1. Drag a **Half Sphere** (Hemisphere). - Size: **Width 32 × Depth 32 × Height 40 mm** - Place it with the flat side facing outward. 2. Drag a **Box** to connect the clip to the main ring. - Size: **Width 15 × Depth 20 × Height 40 mm** - Attach the box to the flat side of the hemisphere, then **Group** them. 3. Move the completed clip to the **left side** of the ring frame and align it vertically. 4. Select the clip, press **Copy**, then **Paste** → Drag the new copy to the **right side** of the ring, perfectly symmetrical. ### ✅ 4. Assign Colors - Main ring frame → **Light Gray** - Inner wiper ring area → **Black** - Water tray body → **Light Blue** - Drain hole detail → **Dark Blue** - Mounting clips → **Silver / Light Gray** ### ✅ 5. Problems & Solutions During Modeling
Parameters
| Name | Value | Range |
|---|---|---|
| Ring frame outer diameter | 100 mm | 60 – 200 |
| Ring frame height | 30 mm | 10 – 80 |
| Central umbrella opening | 60 mm | 30 – 150 |
| Wiper outer diameter | 60 mm | 30 – 150 |
| Wiper scraping diameter | 35 mm | 10 – 120 |
| Wiper thickness | 5 mm | 2 – 15 |
| Tray width X | 120 mm | 70 – 220 |
| Tray depth Y | 100 mm | 60 – 220 |
| Tray height Z | 40 mm | 15 – 100 |
| Tray wall thickness | 5 mm | 2 – 12 |
| Tray floor thickness | 5 mm | 2 – 15 |
| Tray corner radius | 10 mm | 2 – 30 |
| Drain hole diameter | 10 mm | 3 – 30 |
| Connector block length | 15 mm | 8 – 40 |
| Connector block width | 20 mm | 8 – 60 |
| Connector block height | 40 mm | 15 – 90 |
| Clamp dome depth | 32 mm | 10 – 80 |
| Clamp dome width | 32 mm | 10 – 80 |
| Clamp dome height | 40 mm | 10 – 90 |
| Silicone press-fit interference per side | 0.5 mm | 0 – 2 |
| Interlock overlap | 1 mm | 0.5 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
