Brackets and mounts
E-003 Industrial Exhaust-to-Air Heat Exchanger | 60 kW Concept
- Bounding box
- 1976.1 × 1960.2 × 1314.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Industrial stainless 1500×1000×1000 mm E-003 exhaust-to-air heat exchanger. Air DN500 front and rear via tapered square-to-round hollow transitions for 7500 m3/h at 60 to 80 °C; exhaust DN100 from left to right via sealed tube-sheet and 25 hollow longitudinal tubes for 180 to 120 °C; 3 internal baffles, four support feet, two access hatches and two temperature ports. Nominal duty 60 kW is unverified pending heat-transfer calculation. Separate interactive CAD components.
Parameters
| Name | Value | Range |
|---|---|---|
| Stainless housing length | 1500 mm | 1400 – 1700 |
| Stainless housing width | 1000 mm | 900 – 1100 |
| Stainless housing height | 1000 mm | 900 – 1100 |
| Process air DN500 bore | 500 mm | 450 – 550 |
| CHP exhaust DN100 bore | 100 mm | 90 – 125 |
| Square to round air transition length | 320 mm | 240 – 480 |
| DN500 air spigot length | 140 mm | 80 – 220 |
| DN100 exhaust spigot projection | 220 mm | 150 – 340 |
| Air housing rectangular throat X | 700 mm | 600 – 820 |
| Air housing rectangular throat Z | 700 mm | 600 – 820 |
| Sheet metal / spool wall | 6 mm | 4 – 8 |
| Exhaust plenum depth each end | 90 mm | 75 – 125 |
| Tube sheet plate thickness | 12 mm | 10 – 18 |
| Heat transfer tube OD | 42 mm | 34 – 46 |
| Tube wall gauge | 3 mm | 2 – 4 |
| Tube pitch across housing width | 140 mm | 125 – 160 |
| Tube vertical pitch | 140 mm | 125 – 160 |
| Number of tube columns | 5 | 4 – 5 |
| Number of tube rows | 5 | 4 – 5 |
| Internal support-baffle count | 3 | 2 – 4 |
| Internal baffle plate gauge | 5 mm | 4 – 7 |
| Support foot height under housing | 220 mm | 180 – 260 |
| Support foot square side | 85 mm | 70 – 100 |
| Inspection hatch clear square | 200 mm | 170 – 230 |
| Temperature sensor bore | 25 mm | 20 – 32 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o