Brackets and mounts
Dutch Windmill Wind Generator
- Bounding box
- 362.6 × 420.0 × 515.7 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Fully 3D printed realistic Dutch-style windmill (about 330 mm to the cap, 420 mm sails) that works as a wind generator with a 24 mm DC motor: four lattice sails on a hub, M8 threaded-rod windshaft in two 608 bearings, 48:12 brake wheel step-up to the motor pinion, push-in motor saddle with a TPU sleeve, cap turning on a 608 yaw bearing on an M8 rod spine through the tower, tail vane, TPU cap gasket and feet, two 1 W LED lantern mounts in the cap sides and a tray for a step-up board.
Parameters
| Name | Value | Range |
|---|---|---|
| Tower height | 240 mm | 180 – 250 |
| Tower width across flats at the bottom | 150 mm | 120 – 170 |
| Tower width across flats at the top | 80 mm | 75 – 95 |
| Wall thickness | 2.4 mm | 1.6 – 3.2 |
| Sail tip radius | 210 mm | 150 – 220 |
| Sail pitch angle (higher starts easier, lower spins faster) | 18 deg | 8 – 30 |
| Windshaft tilt (nose up) | 7 deg | 4 – 10 |
| Gear module | 1 mm | 0.8 – 1.25 |
| Brake wheel teeth | 48 | 36 – 60 |
| Motor pinion teeth | 12 | 10 – 16 |
| Gear face width | 6 mm | 4 – 8 |
| Pinion rotation for meshing in the model | 0 deg | 0 – 30 |
| 608 bearing seat clearance (diametral) | 0.15 mm | 0.05 – 0.3 |
| Pinion bore clearance on the 2 mm motor shaft | 0.05 mm | 0 – 0.2 |
| Motor body diameter | 24 mm | 20 – 28 |
| Motor body length | 12.5 mm | 10 – 20 |
| TPU motor sleeve wall thickness | 1 mm | 0.6 – 2 |
| LED lens hole diameter (measure your LED) | 5.8 mm | 3 – 9 |
| LED body seat diameter (measure your LED) | 8.8 mm | 5 – 14 |
| LED body seat depth | 3 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl