Dual XGPS160 Window Suction Mount

// Dual XGPS160 Window Suction Mount // Units in millimeters (Converted from 2.24" x 2.24" x 0.75") $fn = 60; // Smooth curves // --- Receiver Dimensions & Clearance --- gps_w = 56.9; // 2.24" gps_l = 56.9; // 2.24" gps_h = 19.05; // 0.75" clearance = 0.6; // Tolerances for easy insert/snug fit // --- Mount Wall & Base Settings --- wall = 2.4; base_t = 3.0; // --- Suction Cup Slot Settings --- suction_neck_d = 3.5; // Diameter of suction cup neck slot suction_head_d = 10.0; // Recess for suction cup rubber head suction_offset = 12.0; // Distance from center for dual suction points module xgps160_mount() { difference() { // Outer Shell Frame union() { // Main Body Box cube([gps_w + (clearance + wall)*2, gps_l + (clearance + wall)*2, gps_h + base_t], center=true); // Side Mounting Flanges for Suction Cups translate([0, (gps_l/2) + wall + 8, - (gps_h + base_t)/2 + base_t/2]) cube([gps_w + wall*2, 16, base_t], center=true); translate([0, -((gps_l/2) + wall + 8), - (gps_h + base_t)/2 + base_t/2]) cube([gps_w + wall*2, 16, base_t], center=true); } // Inner Pocket for Receiver translate([0, 0, base_t/2 + 0.1]) cube([gps_w + clearance, gps_l + clearance, gps_h + 1.0], center=true); // Front Port Cutout (Micro-USB Charging Access) translate([0, (gps_l/2) + wall, (gps_h/2) - 4]) cube([22, wall*3, 10], center=true); // Top Face Visibility Cutout (Exposes status LEDs & saves filament) translate([0, 0, (gps_h/2) + base_t]) cube([gps_w - 8, gps_l - 8, wall*4], center=true); // Top & Bottom Suction Cup Slots for (y = [(gps_l/2) + wall + 8, -((gps_l/2) + wall + 8)]) { translate([0, y, - (gps_h + base_t)/2]) { // Keyhole Slot for Suction Cup Stem cylinder(h=base_t*3, d=suction_neck_d, center=true); // Head Recess translate([0, 0, -0.1]) cylinder(h=1.5, d=suction_head_d, center=false); } } } } xgps160_mount();

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.