3D preview of Dual-Surface Goldsmith Roller
Loading the interactive model…
Interactive 3D model of Dual-Surface Goldsmith Roller

Enclosures and housings

Dual-Surface Goldsmith Roller

1 views
Bounding box
300.0 × 55.0 × 55.0 mm
Engine
Precision B-rep
Parameters
7
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precision mechanical CAD model of a single cylindrical roller for a goldsmith's dual-purpose rolling machine. Dimensions: - Total roller body length: 260 mm - Main roller diameter: 55 mm - Central shaft diameter: 12 mm - Shaft extension: 20 mm on both ends. - Total length including shafts: 300 mm. IMPORTANT SURFACE DESIGN: The cylindrical roller must have TWO distinct working surfaces along its length, with each surface occupying exactly half of the roller's body length. ZONE 1 – GROOVED SURFACE: - Occupies the first 130 mm of the roller body. - Contains multiple evenly spaced circumferential grooves. - The grooves should be machined into the roller surface. - Each groove should run around the circumference of the cylinder. - Use consistent groove spacing and depth. - Designed for rolling and shaping gold wire. ZONE 2 – SMOOTH SURFACE: - Occupies the remaining 130 mm of the roller body. - Completely smooth, flat cylindrical rolling surface. - No grooves, ridges, patterns or texture. - Designed for producing flat gold strips. The transition between the grooved and smooth zones must be clean and clearly visible. MECHANICAL DESIGN: - Both zones must be part of ONE continuous cylindrical roller. - Both zones must have the same outer diameter. - Both ends must have concentric cylindrical shaft extensions. - The roller must be perfectly symmetrical around its central rotational axis. Technical requirements: - Units in millimetres. - One watertight solid CAD body. - No additional housing, bearings or supports. - Centre the roller along the X-axis. - Export as STEP (.step/.stp). - Suitable for mechanical assembly in Autodesk Fusion 360.

Parameters

NameValueRange
Roller Body Length260 mm50 – 500
Main Roller Diameter55 mm20 – 150
Shaft Diameter12 mm4 – 30
Shaft Extension20 mm5 – 80
Number of Grooves10 count3 – 20
Groove Width2 mm0.5 – 4
Groove Depth1.5 mm0.2 – 2.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Dual-Surface Goldsmith Roller - Free CAD Model (STEP, STL) | TextoCAD