Enclosures and housings
Dual-Screen Snap-Fit Enclosure
- Bounding box
- 150 × 75 × 12 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
A smartphone-sized rectangular electronics enclosure with snap-fit edges, inner wall supports, and cutouts for dual screens
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 150 mm | 100 – 200 |
| Width | 75 mm | 40 – 120 |
| Height | 12 mm | 8 – 25 |
| Wall thickness | 2 mm | 1.2 – 4 |
| Floor thickness | 2 mm | 1.2 – 4 |
| Lid thickness | 2.2 mm | 1.2 – 4 |
| Assembly clearance | 0.25 mm | 0.1 – 0.5 |
| Snap width | 6 mm | 4 – 10 |
| Snap height | 1.8 mm | 1 – 3 |
| Snaps per side | 2 mm | 1 – 4 |
| Screen margin from ends | 6 mm | 2 – 20 |
| Screen margin front/back | 8 mm | 3 – 20 |
| Center bar between screens | 5 mm | 2 – 15 |
| Support rib width | 1.6 mm | 1.2 – 4 |
| Supports per short wall | 2 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,