Brackets and mounts
Dual-Pocket Extrusion Nest
- Bounding box
- 90 × 69 × 50 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
space the pockets out more so they are seperate. also the mounting tab on the back needs to be made taller and the holes need to be higher up so i can bolt through into the mounting face. the rear tab should be 50 mm tall
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 90 mm | 20 – 200 |
| Base depth | 60 mm | 20 – 200 |
| Base height | 30 mm | 10 – 100 |
| Tool pocket diameter | 35.5 mm | 10 – 60 |
| Tool pocket depth | 25 mm | 5 – 50 |
| Pocket 1 X centre | 22.5 mm | 0 – 200 |
| Pocket 2 X centre | 67.5 mm | 0 – 200 |
| Pocket Y centre | 30 mm | 0 – 200 |
| Pocket rim chamfer | 1 mm | 0 – 3 |
| Rear tab width | 45 mm | 20 – 100 |
| Rear tab thickness | 10 mm | 3 – 30 |
| Rear tab height | 50 mm | 10 – 100 |
| Mounting hole diameter | 8 mm | 3 – 20 |
| Vertical hole spacing | 20 mm | 5 – 80 |
| Mounting hole pair centre height | 32 mm | 15 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
