3D preview of Dual LED Base Set — 2 Bases + 2 CR2032 Covers
Loading the interactive model…
Interactive 3D model of Dual LED Base Set — 2 Bases + 2 CR2032 Covers

Brackets and mounts

Dual LED Base Set — 2 Bases + 2 CR2032 Covers

1 views
Bounding box
288.6 × 42.0 × 13.0 mm
Engine
Precision B-rep
Parameters
32
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Create two separate 3D-printable LED bases with rounded corners. Dimensions: 68 × 42 × 13 mm. Design 1 – Linear LED boards: - One continuous top groove: 51.4 × 12.6 × 2.7 mm. - Fit two LED boards, each 25 × 12 mm, end-to-end along the groove length (NOT side-by-side). - Add separate positive and negative wire channels. Design 2 – Straw-hat LEDs: - Create suitable holes for 5 mm straw-hat LEDs. - Add internal wire channels. Both designs: - Include an underside compartment for one CR2032 battery. - Add a removable battery cover and metal contact mounting slots. - Use rounded edges and sturdy walls. - Make all parts suitable for FDM 3D printing. Export: Separate STL files for each base and cover, plus editable STEP files. Create accurate mechanical CAD, not just a visual model.

Parameters

NameValueRange
Base Width (X)68 mm40 – 120
Base Depth (Y)42 mm25 – 90
Base Height (Z)13 mm9 – 30
Corner Radius6 mm0 – 12
Top Groove Length51.4 mm20 – 70
Top Groove Width12.6 mm6 – 30
Top Groove Depth2.7 mm1 – 6
+/- Wire Channel Offset16 mm5 – 30
Straw-Hat LED Hole Dia5.2 mm3 – 10
LED Hole Depth5.5 mm1 – 7
LED Count4 pcs1 – 8
LED Pitch12 mm6 – 25
Wire Channel Offset3 mm1 – 12
Wire Channel Depth1.6 mm0.5 – 5
Wire Channel Width2.4 mm1 – 6
Design 1 Channel Depth2.7 mm0.5 – 6
Battery Diameter20 mm10 – 30
Pocket Radial Clearance0.4 mm0.1 – 2
Pocket Depth Above Recess3.6 mm2 – 8
Contact Slot Length (X)5 mm1 – 12
Contact Slot Width (Y)6 mm1 – 14
Contact Slot Depth1.2 mm0.3 – 3
Contact Slot Spacing14 mm5 – 20
Cover Width (X)30 mm15 – 45
Cover Depth (Y)22 mm12 – 35
Cover Thickness2 mm1 – 6
Cover Corner Radius3 mm0 – 8
Recess Clearance0.3 mm0.05 – 1.5
Snap Lip Height0.8 mm0.2 – 3
Snap Lip Flare0.4 mm0.1 – 1.5
Contact Clearance Notch Depth0.7 mm0.1 – 1.5
Exploded Layout Gap30 mm5 – 100

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Dual LED Base Set — 2 Bases + 2 CR2032 Covers - Free CAD Model (STEP, STL) | TextoCAD