DSP 90286 Trimmer Guide Comb - 9 mm

Generate a highly precise, 3D-printable mechanical attachment guard/guide comb designed for a hair trimmer. The trimmer model is DSP 90286. The exact depth from the front cutting edge of the stationary blade to the rear lip where the clip catches is 25.0 mm. Mechanical Fit Specifications: - The internal mounting bed must fit a standard 41mm wide T-blade. - The total internal slot width must be exactly 41.2mm to allow for clearance and a snug slide-on fit. - The rear section of the mounting bed must feature a flexible, snap-on plastic clip/hook designed to lock over a 1mm thick stationary metal blade lip. Comb Geometry & Target Size: - This is the first model of a 3-part set. For this specific generation, the cutting offset height must be exactly 9.0mm (measured vertically from the internal blade bed floor to the apex/outer edge of the teeth). - The comb must feature evenly spaced teeth, 3mm apart from each other. - The tips of the teeth must feature a smooth 1mm radius taper to prevent scratching skin during use. - The model must feature a solid 1.5mm thick sidewall on both the left and right sides to prevent the guard from twisting or flexing under pressure. Output Requirements: - Create this as a single, watertight solid body. - Optimize the geometry for FDM 3D printing without internal structural defects. - Provide the output as a downloadable STEP or high-resolution STL file.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.