Brackets and mounts
DS1065-05 1.27mm 2x12 SMT Female Header
- Bounding box
- 15.6 × 3.1 × 5.2 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a female header connector, series DS1065-05, for STEP export. It has 24 contacts arranged in 2 rows of 12, with a contact pitch of 1.27 mm. The component is for vertical surface mount (SMT). Key Dimensions: Overall Body Length: 15.64 mm (this is the main body length, excluding any tiny protrusions). Distance Between First and Last Pins: 13.97 mm (this is the critical dimension for the pin field). Body Width: 3.10 mm. Insulator Height: 4.40 mm. Critical Features to Model: Two Locating Pegs: On the bottom side, there must be two cylindrical plastic locating pegs (bosses). Their centers should align with the center line of the connector, and they should be positioned symmetrically near each end. These pegs are for board alignment. Hollow Contacts: The 24 contacts are not simple holes. They are cylindrical receptacles. Model them as hollow tubes (with an inner diameter of approximately 0.6 mm and an outer diameter of approximately 0.8 mm) that extend from the bottom surface up into the insulator body. The top openings should be visible. Stepped Body: The insulator body is not a simple flat block. It has a main lower section and a slightly raised upper section around the contact area. Material: The insulator is black PA-9T (UL94-V0). Model it as a single solid body for the STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 15.64 mm | 8 – 40 |
| Body Width | 3.1 mm | 2 – 10 |
| Insulator Height | 4.4 mm | 2 – 12 |
| Raised Section Height | 1 mm | 0.2 – 3 |
| Raised Section Length | 15.2 mm | 5 – 40 |
| Raised Section Width | 2.5 mm | 1 – 10 |
| Contact Pitch (X) | 1.27 mm | 0.5 – 5.08 |
| Row Spacing (Y) | 1.27 mm | 0.5 – 5.08 |
| Contacts per Row | 12 pcs | 2 – 30 |
| Row Count | 2 pcs | 1 – 4 |
| Receptacle Inner Dia | 0.6 mm | 0.2 – 2.5 |
| Receptacle Outer Dia | 0.8 mm | 0.3 – 3 |
| Receptacle Depth (from top) | 3 mm | 0.5 – 10 |
| Locating Peg Dia | 0.8 mm | 0.3 – 3 |
| Locating Peg Length | 0.8 mm | 0.2 – 3 |
| Locating Peg Centres | 12.7 mm | 2 – 36 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl